Page 74
www.us-
tech.com
July, 2016 Virtual: Component Vacuum Handling Systems
Colorado Springs, CO —Virtual Indus tries, a supplier of manual vacuum handling solu- tions, is now offering its TWEEZER-VAC® Elite and ADJUST-A-VAC® Elite component handling systems. The TWEEZER-VAC Elite (TV-1500-
ELITE) was developed in response to cus- tomer concerns about firmly grasping critical components and not dropping them due to a vacuum leak. This vacuum tweezer uses an integrated ten-segment bar-graph display that shows the vacuum level present during operation. In addition, the vacuum port con- tains a replaceable inlet filter that protects operation of the tool from dust particles. The system is available in various kits depending on the handling application. Kits are avail-
able in 110 or 220V operation. The ADJUST-A-VAC Elite (AV-5000-
MW8) was developed to handle thin, deli- cate substrates, wafers, MEMS devices, and other fragile components. This vacu- um tweezer allows the operator to adjust the vacuum level from just below atmos- pheric pressure to up to ten inches of mer- cury, depending on the fragility of the part being handled. Like the TWEEZER-VAC Elite, the system has an integrated ten- segment bar-graph that shows its vacuum level, a replaceable inlet filter, and is
available in 110 or 220V operation. Contact: Virtual Industries, Inc.,
Vacuum tweezer component handling system.
2130 Victor Place, Colorado Springs, CO 80915 % 719-572-5566 E-mail:
nmendez@virtual-ii.com Web:
www.virtual-ii.com
See at SEMICON West, Booth 834
Pickering Electronics: High-Voltage
Reed Relays Clacton-on-Sea, Essex, UK — Picker - ing Electronics, a manufacturer and distributor of instrumentation grade reed relays for ATE, low-thermal EMF, RF-switching and other spe- cialized applications, has introduced its series 67 and 68 reed relays. The relays are available for up to 10 kV stand-off, 7.5 kV switching, and with an option of either PCB or flying lead switch connections. Similar in specification to the
long-established series 60/65, the new relays are manufactured in a
High-voltage reed relays.
single-in-line (SIL) format using for- mer-less coils which dispense with the more usual coil supporting bob- bin, allowing a smaller package than similar rated devices. The unusual package design
presents some interesting packing possibilities for high-density applica- tions, such as multiplexers and matrices in instrumentation and test systems. Standard voltages of 5, 12 and 24V coils are available, and other voltages can be supplied to spe- cial order, as can variations in the lead length of the series 68 range. The relays are suitable for high-volt- age transformer and cable test and some electro-medical applications
including defibrillators. Contact: Pickering Electronics Ltd., Stephenson Road, Clacton,
Essex, UK CO15 4NL % +44-1255-428141 E-mail:
sales@pickeringrelay.com Web:
www.pickeringrelay.com
See at SEMICON West, Booth 6359
See at SEMICON West, Booth 5877
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96