July, 2016
www.us-
tech.com
Firstronic Installs IBL Inline Vapor Phase Reflow System
Burnsville, MN — IBL Technologies has sold a third CX Model in-line vapor phase reflow system to Firstron- ic, a contract manufacturer with head- quarters in Grand Rapids, Michigan. The company made the purchase in anticipation of several new product ramp-ups planned for this year. The CX600/CX800 is a fully-au-
tomated soldering system. It pro- vides precise, high-quality results at medium- to high-volume throughput. The machine is equipped with a stan- dardized SMEMA interface for easy in-line integration. Features include: cycle times of
20 seconds or less, carrier sizes from 680 x 650 x 80 mm (26.77 x 25.59 x 3.15 in.) to 825 x 650 x 80 mm (32.48 x 25.59 x 3.15 in.), two independent stations for carrier loading and un- loading, conveyors with a buffer func- tion, three internal process chambers
Systems Sollentuna, Sweden — Optilia In- struments has added integrated laser pointers to its economical M se- ries of inspection systems. Though the company has always included in- tegral laser pointers as a standard feature of the high-end W series, due
Optilia Offers Built-In Laser Pointer for Inspection
with automatic airlocks, and an ener- gy management system for low ener-
gy and fluid consumption. According to the team at First -
ronic, the machine has increased changeover efficiency drastically, be- cause there are fewer profiles needed than for convection reflow. Switching from one to another takes a few min- utes vs. the wait time for a convec- tion oven to stabilize. In addition, the condensation and evaporation cycles leave the solder joints with a clean, shiny appearance, similar to older
water-wash processes. Contact: IBL Technologies, LLC,
The Firstronic team with IBL’s vapor phase reflow system.
11300 Rupp Drive, Burnsville, MN 55337 % 952-217-4407 E-mail:
j.lipp@
ibl-tech.com Web:
www.ibl-tech.com
Page 43
Optilia M series inspection system.
to customer demand, the optional feature is now available for the M Se- ries as well. The laser pointer feature is available for the entire M Series range including the Easyview stan- dard 245 mm (9.65 in.) working dis- tance (WD) and Freesight 500 mm (19.69 in.) WD models. The laser’s red dot is particular-
ly helpful when working at higher magnifications; it makes feature identification and orientation much easier, especially when inspecting larger objects or PCBs. This greatly speeds up the inspection process without having to zoom out and back in again to find the region of interest. The highly successful Optilia X-Y floating tables that facilitate hand/ eye coordination as well as providing an ESD-safe and stable platform also improve inspection. Accessories including close-up
lenses, the SD-card image capture de- vice, X-Y Floating table, and others
can be added to the system easily. Contact: Optilia Instruments AB, Djupdalsvagen 22, S-192 51,
Sollentuna, Sweden % 46-0-8-35-3360 E-mail:
info@optilia.eu Web:
www.optilia.eu
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96