December, 2015
www.us-
tech.com
WAGO Introduces Shield Clamping Saddles
Germantown, WI — WAGO’s 790 Shield Clamping Saddles now come with a patented latching mechanism offering greater usability. Instal lation without force is guaranteed by a spring that can be easily latched open while positioned over the conductor and the busbar, and is just as easily released on the conductor shield. For added safety and con-
venience it offers marking loca- tions to accommodate the WMB marker and multi-line continu- ous marking strip. Ergonomically designed to
ensure enhanced usability, the series has large, recessed grips that make tensioning of the spring less difficult. The spring clamp has been designed to apply a specific amount of pres- sure required for proper contact and shielding effect. The series is available in
specially slotted carrier rail and U-
shaped busbar are also available. Contact: WAGO Corporation,
N120 W19129 Freistadt Road, Germantown, WI 53022
PROTECT YOUR IC PACKAGES FROM
HUMIDITY PROBLEMS GLOBAL DRY STORAGE LEADER FOR ELECTRONICS COMPETITIVE PRICING!
CONFORMS TO IPC/JEDEC J-STD-033C & IPC-1601
ULTRA-LOW HUMIDITY STORAGE 1%RH
Shield clamping saddle with latch mechanism.
three variants for shield diameters ranging from 3 to 20mm (0.12 to 0.8 in.). Industry accessories such as a
% 262-255-6222 fax: 262-255-3232 E-mail:
info.us@
wago.com Web:
www.wago.us
VARTA Releases New Battery System
Rye, NY — VARTA Micro Group, designer and manufacturer of rechargeable and primary batteries, has released the VARTA Flex System through its subsidiary VARTA Storage GmbH. The Flex System is comprised of a 24kWh lithium-ion battery cabinet, power electronics and a control unit. Optimized for employment in
commercial environments, the new battery system provides a long cycle life in excess of 12,000 cycles at 100 percent depth of discharge. The sys- tem can be adjusted to different size and capacity settings up to 1 MWh. VARTA Storage introduced the sys- tem at Solar Power International.
Designed for use in an array of
solar power systems, the VARTA Flex System is fully compatible with standard 480V, 3-phase AC invert- ers. It is suited for demand response programs enabling commercial cus- tomers to reduce their electricity usage over time. The system is supplied in a ven-
tilated enclosure and may be ordered with battery racks providing from
24kWh to 1000kWh. Contact: VARTA Batteries, 555
Theodore Fremd Avenue, Suite #304, Rye, NY 10580 % 914-570- 2218 fax: 914-592-2667 E-mail:
eric.lind@
varta-microbattery.com Web:
www.varta-microbattery.us
Custom Test Contactors from Yamaichi
Munich, Germany —Recent semicon- ductor devices, like wafer level CSPs for mobile applications have ball pitches of 0.35mm (0.014 in.), and the industry is trending toward even tighter pitches.
device to avoid damaging it. The company has developed the
contactors with an opening and clos- ing mechanism that is easily released. The contactors have been designed with compression mount technology, so no soldering is necessary. Selected materials like aircraft aluminum, PEEK and ceramic PEEK make the sockets durable. These sockets can be used in
evaluation testing, reliability and stress tests, ESD or latch-up tests, and for failure analysis. For its test sockets, the com-
Yamaichi custom TCs. For testing these kinds of de -
vices, Yamaichi Electronics has devel- oped test contactors (TC) within its YED254 and YED274 series. The TCs are individually modified and de - signed for different outline dimensions of a package. The company takes spe- cial care to create a homogenous force distribution on the surface of the
pany offers a large portfolio of probe pins. The low inductance probe pin for 0.35mm (0.014 in.) pitch components is 1.7mm (0.067
in.) long in working position. Contact: Yamaichi Electronics
Deutschland GmbH, Concorpark, Bahnhofstrasse 20, 85609
Aschheim-Dornach, Germany % +49-0-89-4-51-09-0 fax: +49-0-89-4-51-09-110 E-mail:
info-de@yamaichi.eu Web:
www.yamaichi.eu
DXU 1001 DXU-1001
SEIKA MACHINERY, INC. HEADQUARTERS: 3528 TORRANCE BLVD., SUITE 100 TORRANCE, CA 90503 PHONE: (310) 540-7310 FAX: (310) 540-7930 E-MAIL:
INFO@SEIKAUSA.COM
WWW.MCDRY.EU
HELTORFER STRASSE 16, D-40472 DÜSELDORF PHONE: 0211-4158-0 FAX: 0211-4791428 E-MAIL:
INFO@SEIKA-GERMANY.COM
DXU 1002
WWW.MCDRY.US NORTH AMERICAN AGENT:
ATLANTA OFFICE: 1580 BOGGS ROAD #900 DULUTH, GA 30096 PHONE: (770) 446-3116 FAX: (770) 446-3118
EUROPEAN AGENT: DXU-1002 DXU U-580 FEEDER CABINET DXU U-580AF FEEDER CABINET
Page 81
MCU-201
MCU-301
MCU-401
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88