Page 72
www.us-
tech.com
December, 2015
Energy Monitoring System from Ringdale
Georgetown, TX — Ringdale, Inc., a manufacturer of solid-state technolo- gies, has introduced its CT Energy Monitor and Data Logger for single- or three-phase power systems. Energy and facility managers can use the system to monitor and detect a variety of power issues. The system measures
Manufactured in the U.S.A. since 1966
www.westbond.com
1551 S. Harris Court Anaheim, CA 92806 Tel 714·978·1551
root-mean-square (rms) current and voltage. Man - a gers remotely access the monitor through their net- work to identify where energy might be wasted, or to locate patterns of in - creased power use. Gathered informa-
tion can be accessed in real time through a web application, as well as stored on a USB drive for later evaluation. The system can be used to mon-
Energy monitor and data logging system. in the case of a voltage surge, power
itor energy at multiple locations, such as in high-rise buildings where energy use per tenant or per floor is used for billing. Besides keeping records of energy use, the monitor can send alarm notifications by email
outage, or failure. Contact: Ringdale, Inc., 101
Halmar Cove, Georgetown, Texas 78628 % 888-288-9080 or 512-288-9080 fax: 512-288-7210 E-mail:
sales@ringdale.com Web:
www.ringdale.com
Ametherm Customizes Thermistor Assemblies
Test for gross and fine leaks in as little as 6 minutes.*
Carson City, NV — Ametherm now has the ability to completely customize its offering of NTC thermistor probe assemblies to meet the specific needs of any application. Designed and built
in as little as two weeks, the units are an option for high-accura- cy temperature sensing and measurement for IGBT chips and heat - sinks in welding equip- ment, plas ma cutters, air sensors, electric motors, and HVAC sys- tems.
Ametherm’s NTC
Only NorCom optical leak technology detects both gross and fine leaks in hermetically sealed packages, this fast. Instead of using multiple technologies
and processes, you can leak test virtually any type of package with one high-speed system. The NorCom 2020™
series inspects hermetically sealed components to
MIL-STD 883 requirements either in seam seal trays, or when already mounted to circuits boards and assemblies. It automatically rejects failed devices, and reports the leak rate for each part, eliminating “divide and conquer”leak testing.
NorCom 2020™
Try it free. Send us your package samples today, for a leak test evaluation and report at no charge. *Note: Test time is dependent on package volume
www.norcomsystemsinc.com
610-592-0167 1055West Germantown Pike Norristown, PA 19403 USA
thermistors are manufactured from a specially formulated metal oxide ceramic material that is extremely accurate in sensing temperature. Utilizing this same material, the company’s custom probe assemblies are available in a variety of housings including ring and flag terminal,
steel tube, threaded hex, threaded long tip, and in lead wire gauges and insulation thicknesses. The company can build the
if a high or low current event or other user situation occurs. Users can also program the alarm to send a message
A range of thermistors.
devices to customer-specified resist- ance values, tolerances, beta values, insulation resistance, and dielectric
voltage breakdown. Contact: Ametherm, Inc., 961
Fairview, Carson City, NV 89701 % 800-808-2434 or 775-884-2434 Web:
www.ametherm.com
Current Sense Resistor KOA Corp. Intros
Bradford, PA — KOA Speer Elec - tronics has introduced the UR73V, 1206 size, thick film current sense resistor. With an operating range of –55 to +155°C (–67 to +311°F), the resistor is AEC-Q200 qualified, has a 0.5W power rating, and resistance range of 10 to 100mW. With a standard tolerance of ±1
percent, and TCR values of +100ppm/°C and 0 to ±250ppm/°C, the resistor is designed for accuracy and current detection, making it suitable for the automotive, telecom- munication and consumer electronics
markets. Some automotive applica- tions include engine control, air bags and dashboard navigational systems. They can also be put to use in con- verters and adapters, notebook PCs, battery packs, and mobile phones. The resistors are available with
lead-free terminations to meet RoHS requirements, and a lead time of 10
weeks. Contact: KOA Speer Electronics,
Inc., 190 Bolivar Drive, Bradford, PA 16701 % 814-362-5536 fax: 814-362-8883 Web:
www.koaspeer.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88