Page 92
www.us-tech.com
West Chester, PA — Sonobond Ultrasonics’ free Ultrasonic Metal Welding Viability Test is proving to be an important help to firms across a wide spectrum of industries. Ultrasonic metal welding is a reli- able, well-established, environmen- tally-friendly process that produces solid-state metallurgical bonds with- out excessive heat, current, or con- sumables. This is accomplished by introducing high-frequency vibration while the weldment is under moder- ately high clamping force. Non-ferrous similar and dissim-
ilar metals can be welded with repeated accuracy in a single opera- tion that takes only seconds. Sonobond ultrasonic metal welders
use quick-change taper lock tips that are capable of performing up to 100,000 welds before replacement. All of the company’s ultrasonic
metal spot welders are made in the U.S.A. They have an important advantage over other types of metal welding equipment because they use the unique, patented “Wedge-Reed” bonding system. This maximizes welding effectiveness by combining high vibratory force with low ampli- tude coupling. Dependability is assured by uti-
lizing shear mode vibration parallel to the welding surface. At the same time, bending stress is eliminated by posi- tioning the line of force directly over the welding surface. This is the only
ultrasonic system able to reliably weld most oxidized and tinned metals in one pulse, without pre-cleaning. The SonoWeld© 1600 Digital
Metal Spot Welder is suitable for spot and wire-to-terminal welding. It is frequently used to weld multiple layers and/or delicate foils to tabs or terminals for lithium and NiMH bat- tery assembly. It confidently welds dissimilar metals, such as copper to aluminum, and allows storage and recall of over 250 weld protocols. The SpliceRite™ Wire Splicer
creates solid-state metallurgical welds of wire bundles up to 60mm2 in size. This equipment can splice tinned oroxidized wires up to 35mm2 in just one pulse.
SonoWeld 1600. Contact: Sonobond, 1191
McDermott Drive, West Chester, PA 19380 % 610-696-4710 E-mail:
info@SonobondUltrasonics.com Web:
www.SonobondUltrasonics.com
See at AeroCon (Electronics West/MD&M) Booth #4195.
Inovaxe: Ultra Lean Material Handling
Deerfield Beach, FL — Inovaxe is highlighting its Ultra Lean Total Material Handling and Storage Solution which addresses the chal- lenges of dealing with SMT parts and kits within the stockroom and WIP locations.
February, 2013
Sonobond: Free Ultrasonic Metal Welding Viability Test The SPG 2600 Single Point
Ground Welder produces single point ground terminals for complex automo- tive electronic circuitry. It welds up to 18 wires to one terminal and automat- ically folds the terminal arms to pro- vide stress relief on the joint.
MSD cart with reels. The industry favorite InoKit
Carriers in combination with the InoKit Pro Service also will be high- lighted. InoKit Pro is an ultra lean solution for the acquisition and kit- ting of prototype parts for engineers and manufacturers. InoKit Pro serv- ice provides prototype turnkey kits delivered to you or your EMS providers in our organized, efficient, state of the art, single package single location InoKit carriers. The InoView software is an
excellent tool for managing parts and kits within the stockroom and WIP. Part locations can quickly be identi-
fied with accuracy and traceability. Contact: Inovaxe, 1015 W.
Newport Center, Ste. 108, Deerfield Beach, FL 33442 % 954-531-1363 E-mail:
info@inovaxe.com Web:
www.inovaxe.com
See us at IPC/APEX Booth 327 See at IPC/APEX Booth #3248.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136