72 FORMULATIONS
guar. Add phase B and mix until uniform. In separate vessel heat phase C to 45-50˚C and the sequentially add in phase D ingredients and mix until clear and uniform, then remove from the heat (Note: Pureact MS-CG and Pureact Gluco C need homogenising by heating to 35-40˚C and mixing before addition to the vessel). Add phase CD to phase AB and mix until clear and uniform. Add phase E and mix until fully emulsified. Add phase F and mix until fully uniform and clear. Phase G: Adjust to pH to pH 5.5-6.0 with 50% citric acid solution as required. Suppliers 1 Innospec 2 Solvay 3 Nouryon
INNOVACOS Illuminizer Stick
PHASE INGREDIENTS/INCI NAME A
Polyglyceryl-2 Stearate - PolyAquolTM OS2 Euphorbia Cerifera (Candelilla) Wax Microcrystalline Wax
Vegetable Oil (and) Hydrogenated Vegetable Oil
(and) Euphorbia Cerifera (Candelilla) Wax Stearyl Linoleate (and) Stearyl Stearate (and)
Polyhydroxystearic Acid (and) Stearyl Alcohol - innollientTM SL Cocoglycerides
Propylheptyl Caprylate Polyethylene
Hydrogenated Polyisobutene
Hydrogenated Dimer Dilinoleyl/Dimethylcarbonate Copolymer
B Octyldodecyl Oleate (and) Octyldodecyl Stearoyl
Stearate (and) Polyhydroxystearic Acid (and) Octyldodecanol - innollientTM LO Decyl Oleate Tocopherol
C Mica, CI 77891 (Titanium Dioxide), CI 77491 (Iron Oxides) D
Parfum
JEEN INTERNATIONAL CORP Prestige Cream PHASE INGREDIENTS A Water
INCI NAME Deionized Water Hydroxycellulose Hydroxycellulose Gum 0.5% sol.
Gum (0.5% sol.) Glycerin 99.7% USP1 DL-Panthenol1
B
FD 19-01-21C % W/W
Polyglyceryl-2 Oleate (and) Polyhydroxystearic Acid (and) 9.00
10.00 3.00 6.00
8.00
10.00 4.00 4.00 3.00 8.00
14.10
8.00 0.50
12.00 a.n.
Procedure Melt the ingredients of phase A and keep under stirring. Add premixed phase B under gentle stirring. Add phase C and mix it up to a homogeneous pigments dispersion; Pour into lipstick mould.
JARCHEM INDUSTRIES INC JarchemTM
PHASE INGREDIENTS A
KLTA AMF Zemea™ Glycerin
Intense Hydrating Serum INCI NAME
Actique™ PGA Sodium Polyglutamate
Actique™ NAG Acetyl Glucosamine Gum Acacia
Propanediol Glycerin
Aminosyl™ NL50 Sodium PCA Water
Aqua
Actique™ Hyal 1% Sodium Hyaluronate (and) Aqua euxyl™ PE 9010
Phenoxyethanol (and) Ethylhexylglycerin Acacia Senegal Gum Jeesperse® CPW-S1 Jeechem®
C D
Jeechem® NDA-O1 OleoSilTM T1 NDA-D1
Shea Butter1 Avocado Oil1 Jeechem® Jeechem®
E
CTG1 SMO1
Phenoxy1 Glycerin Panthenol
Helianthus Annuus (Sunflower) Seed Wax (and) Sodium Polyacrylate Octadecane
Tetradecane (and) Dimethicone Crosspolymer-3 Dodecane
Butyrospermum Parkii (Shea) Butter Persea Gratissima (Avocado) Oil Caprylic/Capric Triglyceride Sorbitan Oleate
Geopearl Violet Geopearl Violet Vanilla Fragrance Vanilla Fragrance Jeecide®
Phenoxyethanol
J43-104/G % W/W
68.80 10.50
0.55 0.20 3.15
3.00 3.75
5.75 0.30 0.55 0.55 0.80 1.00 0.10 1.00
Procedure In main beaker, add phase A ingredients, one at a time, and mix until homogeneous with propeller mixer. Heat up to 30-35˚C. Add phase B to phase A and mix until homogeneous. Add phase C ingredients, one at a time, to phase AB and mix until homogeneous. Add phase D ingredients, one at a time, to phase ABC and mix until homogeneous. Add phase E to phase ABCD at 25-30˚C and mix until homogeneous. Properties ph Suppliers 1 JEEN International
KAHLWAX Feel & peel good PHASE INGREDIENTS A
Castor Oil B
2178 Castor Wax1 Dermofeel MT 70 non GMO2 Bentone Gel TN V3
CMV02057 % W/W
0.5 0.5 0.4
1.0 1.0 2.0
18.6 75.0 1.0
Procedure Add Actique™ PGA, Actique™ NAG, and acacia gum to vessel. Add Zemea, Glycerin, and Aminosyl NL50 to vessel. Begin mixing. Add water continue to mix until powders have dispersed. Add Actique™ Hyal 1% and preservative and mix until homogenous. Suppliers 1 Jarchem 2 Kerry 3 Dupont Tate & Lyle Bio Products 4 Acme Hardesty 5 Schülke
PERSONAL CARE EUROPE C
INCI NAME
Ricinus Communis Seed Oil Hydrogenated Castor Oil
Tocopherol, Helianthus Annuus (Sunflower) Seed Oil
SC-BOD-006-01 % W/W 48.85 2.05 0.50
C12-C15 Alkyl Benzoate, Stearalkonium 12.20 Hectorite, Propylene Carbonate
Lumorol K 1000 MIPA-Laureth Sulfate, Laureth-4,
Cocoamide DEA4 2811P Rice Bran Oryza Sativa Bran Cera
Wax Beads1 Oxypon 4014 Actio Five5
COD 8007 (0.8 %)6
PEG-9 Cocoglycerides Parfum
Ricinus Communis Seed Oil, CI 42090 29.20 2.50
2.70 0.50 1.50
Procedure Combine phase A ingredients and heat to 85–90°C. Add phase B and homogenize until uniform. Cool to approx. 30°C under stirring and add phase C ingredients in listed order. Suppliers 1 KahlWax. 2 Evonik Dr. Straetmans. 3 Elementis. 4 Zschimmer & Schwarz 5 Lothar Streeck. 6 Sun Chemical
MERCK Micropigment Sun Cream for Children in vivo SPF 35 PHASE INGREDIENTS A
Eusolex® T-S1
INCI NAME
Titanium Dioxide (Nano), Alumina,Stearic Acid
MDA-S-10-01 % W/W 17.00
June 2020
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76
