030 REPORT
AUCKLAND TOWN HALL
Company: Pulsar Location: Auckland, New Zealand
In the mid-1990s, the Auckland Town Hall was restored to its original splendour, but the organ was largely untouched, apart from moving the console back to its former position in the centre of the façade. Around the turn of the century, the growing dissatisfaction of musicians prompted City Organist Dr John Wells to seek a solution. Preliminary investigations led to the formation of the Auckland Town Hall Organ Trust, the appointment of international consultant Ian Bell of London and the calling of world-wide expressions of interest from organ builders. The aim was to ‘restore the splendour of the town hall organ.’ Following the subsequent tendering process, the Auckland City Council signed a contract with one of Germany’s largest organ building companies, Orgelbau Klais of Bonn for $3.5 million. The city provided $3 million; the rest came from public subscription through an ‘adopt-a-pipe’ scheme administered by the Trust. Having spent so much money on restoring the organ it was a shame to not light it up in all of its glory and so initially ten PAR64 fixtures mounted on H-stands around the floor were used. However they were unsatisfactory due to the heat they gener- ated and the large amount of power they required. Malcolm Ibell, Head of Lighting for the entire precinct, The Edge, which includes the Aotea Centre, The Civic, Auckland Town Hall and Aotea Square started to look around for an alternative solution. He had to bear in mind that the Town Hall is a Class 1 Heritage building con- structed entirely of timber and special permission is required to do even the smallest of projects. “Being wooden the building is one big flame waiting to happen and so LED lighting seemed a safer alternative,” said Malcolm. “Unfortunately I found that hardly any LED fixtures on the market were tri-colour and with the organ having so many angles, I couldn’t use any LED fixtures that created weird coloured shadows.” Fortunately Malcolm soon found his ideal fixture in the Pulsar ChromaFlood 200
TriColour and consequently he recommended the purchased of eight. The Chro- maFlood200 TC features 66 TriColour LEDs, with a maximum power consumption of 200W. These fixtures are proving to be an important product for LED lighting in both architecture and entertainment as they produce mixed colour within the unit, eliminating multicoloured point sources and multicoloured shadows. “There are so many more reasons why I went with the Pulsar fixtures; there are no moving parts, no fan and the maximum temperature they ever get to is about 40° after they have been on for days,” added Malcolm. These factors were particularly important due to the fact that the ChromaFloods are situated within the floor of the top wooden step and although access isn’t too difficult - just a case of lifting the 18mm thick glass cover - Malcolm also wanted a low maintenance solution. “Once I had figured out what I wanted to do, I got the heritage consultants and the city council on board and they were happy for holes to be cut in the step,” he explained. “The glass is thick enough for people and road- cases to travel over in safety.” Malcolm is extremely impressed by the ChromaFlood’s lens system and impeccable dimming capabilities. “The ChromaFloods have a really cool lens system that allows you to unscrew the top and use different lenses,” he said. “Most are 25° except the ones in the centre by the console which are 25° x 12° - more like an oval par can shape so they fire up onto the pipes and not the wood around them. It’s pretty cool being able to experiment with the lenses to work out which work the best. “The ChromaFloods have amazing dimming - by far the best I’ve ever seen in an LED fixture. They don’t flicker at low levels which is important as the venue hosts a lot of television work.” Malcolm did a fine job producing a cost benefit analysis around the use of LEDs working out the cost of running them over a lifetime. “Although manufacturers give LED fixtures a lifetime of 100,000 hours I did my calculations on 50,000 hours of life with out bulb or gel costs, labour costs for maintenance and power savings. By doing this I was able to show the number-crunchers how quickly they paid them- selves off. I’m a real convert to them and I’m hoping to add some more to the rest of the venue.”
www.pulsarlight.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148