ADD-ON TOOL SETS HOSSFELD UNIVERSAL
®
Model No. 2 Bender
Follow all recommendations for the minimum wall thickness that
can be bent with the tooling. Bending stock that is too thin or too
thick for the desired radius may result in breakage or distortion of
the stock.
Add Basic Tooling in Convenient Sets
The 46000 No. 2 Bender package is a fully operable machine for simple, basic bends. In addition, we offer several Basic Tooling Sets that will
expand the Bender's capabilities with easy-to-add tooling. These prepackaged sets contain form dies and blocks that we've found are the most
popular and widely used for each type of bending. For complete descriptions, and for our full range of tooling for all stock sizes, turn to the
listed sections.
Pipe
Pipe Dies
General Purpose Toolset for Bending Pipe
PART NO. DESCRIPTION SIZE
46001 . . . . . . . . . . . . . . 44 lbs Gross Weight
20075 15B Pipe Die 1/4", 3/8" & 1/2" P
These dies let you bend several sizes in Pipe with each setup. They
20072 14B Pipe Die 3/4" & 1" P
may be a cost-effective solution for fabrication-type jobs when you
20069 13B8 Pipe Die 1-1/4" P need to bend angles, offsets, and return bends for several jobs – they
20067 13B6 Pipe Die 1-1/2" P
let you choose your task and quickly set up the bender to fabricate
20065 13B4 Pipe Die 2" P
several different parts. Bend all sizes of standard Pipe and Rigid
Conduit. Form smooth, even radius bends without flattening the pipe
Rollers
or splitting the seam. Bend to any degree or to a continuous coil, as
desired. Order the complete set or individual parts, as needed.
PART NO. DESCRIPTION
Includes the following parts:
20076 15B2 V-Grooved Roller for 15B, 14B, 13B8
20068 13B7 Roller for 13B6
For a complete description, see pg. 18 in the
20066 13B5 Roller for 13B4
Pipe Section
Flat and Bar Stock
U-Bends General Purpose Toolset for Bending Bar
PART NO. DESCRIPTION SIZE
46002 . . . . . . . . . . . . . . 28 lbs Gross Weight
20045 7B Cam Die 1-3/4"
These tools let you bend “S” shapes, “U” shapes, Sharp Square
20046 8B Cam Die 2"
Bends, Eye Bolts, Rings, Coils and more in Flat and Bar Stock.
20047 8B2 Cam Die 2-1/4" Like the General Purpose Toolset for Pipe, the General Purpose
Toolset for Bar offers a cost-effective way to get a complete setup
Rings, Eyes for making several types of bends in Flat or Bar.
PART NO. DESCRIPTION Order the complete set or individual parts, as needed.
20078 16B Eye-Bolt Bending Dog
Includes the following parts:
20085 17B3 Offset Flat-Head Pin
For a complete description, see pg. 23 in the
20091 18B Eye Pin
Flat and Bar Stock Section
20222 20B5 Center Pin (for 1/2", 5/8" & 1" Eyes)
20685 21B U-Pin Roller
20705 24B Thumb Nut (2)
Square Bends
PART NO. DESCRIPTION
20697 23B Yoke
20717 26B Sharp Square Bending Block
51B2 Edgebend Die Set
20949 . . . . . . . . . . . . . . . 9 lbs Gross Weight
PART NO. DESCRIPTION
Edgebend Flat stock “The Hard Way” with this special die that grips
20954 51B2-1 Edgebend Die
stock tight to maintain flatness. Die must be used with No. 20987 50B
20983 51B4 Edgebend Pin (2)
Outbend Master Die, No.’s 21036-21061 52B Inner Radius Blocks
and No.’s 20940-20946 51B3 Spacer Sets.
For a complete description, see pg. 30 in the
Flat and Bar Stock Section
60B “Bulldozer” Die Set
21100 . . . . . . . . . . . . . . 10 lbs Gross Weight
PART NO. DESCRIPTION
Form Square Bends or Round Bends in light Flat and Bar Stock
21104 60B2 Bulldozer Die
including closed rings and intricate wire bends. 21101 60B1 Bulldozer Center Pin
For a complete description, see pg. 27 in the Flat and Bar
21078 53B Wrist Pin
Stock Section
Office: (507) 452-2182 Fax: (507) 454-1194
5
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48