OD TUBE HOSSFELD UNIVERSAL
®
Model No. 2 Bender
Follow all recommendations for the minimum and maximum wall
Safety Note: .134" Wall (10 Gauge) is the maximum wall
thickness that can be bent with the tooling. Bending stock that isthickness you can safely bend with ANY of our OD Tube Die
Sets. Bending thicker stock may result in breakage of the die
too thin or too thick for the desired radius may result in breakage
and/or injury.
or distortion of the stock.
DRAW BLOCK
DRAW BLOCK REGULAR BACK DRAW BLOCK
LINKAGE BLOCK COMPOUND
LINKAGE
BACK
BLOCK
BACK FORM
FORM DIE
BLOCK
FORM DIE
DIE
Hydraulic Power recommended
1-1/2" OD 1-3/4" OD
when bending 1-1/4" OD Tube
.065" Min Wall (16 Gauge) .120" Min Wall (11 Gauge)
PART NO. CLR PART NO. CLR
and up.
28107* 6" 29374 8"
1-1/4" OD
28207* 10"
28234* 11"
.083" and .065" Wall ONLY
.065" Min Wall (16 Gauge)
28314 17-1/2"
(14 Gauge and 16 Gauge)
PART NO. CLR
28320 18"
PART NO. CLR
26228 10"
28356 22"
29380* 8"
26258 11-1/4"
28374 25"
26298 14-3/8"
.065" Min Wall (16 Gauge)
28380 26"
26318 16" Part No. CLR
28393 29-1/8"
26378 21-5/8"
28385 36"
29616 29"
26395 23-5/8"
28388 48"
29688 41-1/4"
26450 32-3/8"
29795 104-7/8"
26552 57"
26608 168"
1-5/8" OD
1-7/8" OD
.065" Min Wall (16 Gauge)
.065" Min Wall (16 Gauge)
1-5/16" OD
PART NO. CLR
PART NO. CLR
.083" Min Wall (14 Gauge)
28715* 6"
30012* 8"
PART NO. CLR
30038* 9"
27264 6"
.134" Min Wall (10 Gauge)
30100 12"
27296 7"
PART NO. CLR
30148 16"
27312 7-1/2" 28755 7-1/2"
30196 20"
27328 8" 28789 9"
30220 24"
27352 9"
.065" Min Wall (16 Gauge)
30238 27"
27360 9-1/2"
PART NO. CLR
30280 34"
.065" Min Wall (16 Gauge)
30340 48"
28813* 10"
PART NO. CLR
30546 85-1/2"
27376 10-1/2"
.120" Min Wall (11 Gauge) 30582 192
27392 12"
PART NO. CLR
27404 12-3/4"
28819 10" 2" OD
27408 13"
28845 11"
.134" Min Wall (10 Gauge)
27424 14"
PART NO. CLR
.083" Min Wall (14 Gauge)
27440 15"
30753 9"
PART NO. CLR
27512 24"
27536 30"
28857 12" .065" Min Wall (16 Gauge)
27556 35"
28869 13"
PART NO. CLR
27560 36" .065" Min Wall (16 Gauge)
30765** 10"
27572 48"
PART NO. CLR
30909* 24"
27624 96"
28929* 18"
30919* 26"
27720 192"
29013 30"
30985* 36"
29037 34"
31017* 42"
1-3/8" OD
29049 36"
31035* 48"
.065" Min Wall (16 Gauge)
29109 51"
31105* 62"
PART NO. CLR
26975 16" * Die Set includes Draw Block with “Regular Linkage.”
26983 18"
** Die Set includes Draw Block with “Compound Linkage.”
27000 20"
Office: (507) 452-2182 Fax: (507) 454-1194
17
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48