HOSSFELD UNIVERSAL
®
Model No. 2 Bender OD TUBE
Round OD Tube – All specifications refer to Electric Resistance Welded (ERW), cold drawn over mandrel
Safety Note: Hydraulic Power is recommended for
(DOM), Mechanical ASTM A36 Hot Rolled Mild Steel (HRMS) Tube.
Outside Diameter (OD)
bending the following sizes: 1-1/4" – 2" OD Tube.
– Round OD Tube is measured by its Outside Diameter, e.g., 1" OD.
Center Line Radius (CLR) – Radius bends in OD Tube are measured from the center of the bend to the
center line of the tube. CLR sizes are for bends made in Round OD Tube. Final radius dimensions will vary
for Copper, Brass, Aluminum or Alloy Steel.
Contact Factory if you have bending jobs requiring other materials.
Feed-Along OD Tube Die Sets
Make Large-Radius Bends up to 360° in OD Tube
Bend larger-radius bends or coils. These dies will bend listed types of Round
OD Tube smoothly, without distortion or surface blemish, and without the use of
internal supporting mandrels or any kind of filler. Add precision-controlled
Hydraulic Power for accurate production of quantity parts. We recommend
using Hydraulic Power when bending larger stock sizes, listed below. Feed-Along OD Tube Die Set (Form Die, Back Block, Draw Block)
bending OD Tube to a large radius
1/2" OD 7/8" OD 1-1/16" OD
.049" Min Wall (18 Gauge) .049" Min Wall (18 Gauge) .065" Min Wall (16 Gauge)
PART NO. CLR PART NO. CLR PART NO. CLR
21747 5-3/4" 23198 5-9/16" 24632 6"
21824 9" 23227 6-5/8" 24644 6-1/2"
21847 10" 23237 7" 24668 8"
21882 11-3/4" 23248 7-1/2" 24676 8-1/2"
21887 12" 23259 8"
21898 13" 23305 10"
.049" Min Wall (18 Gauge)
21908 14" 23328 11"
PART NO. CLR
21918 15" 23339 12"
24680 9-1/4"
21928 16" 23362 14"
24684 9-1/2"
21948 18" 23529 36"
24692 10-1/2"
21968 20" 23559 48"
24700 11-1/2"
23573 130"
24704 12"
5/8" OD
23590 150"
24712 13"
24720 14"
.049" Min Wall (18 Gauge)
PART NO. CLR
1" OD
24744 17"
24748 17-1/2"
22153 3-1/2" .065" Min Wall (16 Gauge)
24760 18"
22229 6-5/16" PART NO. CLR
24777 20"
22246 7" 23939 6-1/2"
24809 24"
22294 9" 23987 8"
24834 30"
22314 10" 24005 8-5/8"
24858 36"
22334 11" 24017 9"
24882 42"
22344 12" 24029 9-1/2"
24906 48"
22374 15" 24041 10"
24910 54"
22404 18" 24077 11-3/4"
24914 60"
22419 20" 24083 12"
24954 120"
22459 28" 24089 12-1/2"
22479 32" 24107 14"
24125 15-1/8"
1-1/8" OD
3/4" OD
24143 16-1/8"
.049" Min Wall (18 Gauge)
.049" Min Wall (18 Gauge)
24161 17-1/2"
PART NO. CLR
PART NO. CLR
24173 18-1/2"
25146 8"
22755 7-1/4"
24191 19-5/8"
25206 10-1/2"
22788 8"
24221 24"
25224 11-1/2"
22803 8-1/2"
24239 27"
25314 18-9/16"
22819 9"
24257 30"
25362 24-9/16"
22839 10"
24335 42"
25404 31"
22859 11"
24355 48"
22868 11-1/2"
24375 59"
1-3/16" OD
22876 12"
24390 65"
.065" Min Wall (16 Gauge)
22884 13-1/2"
24405 83"
PART NO. CLR
22889 13-3/4"
24425 168"
25759 14"
22900 15-3/16" 25795 17"
22914 16" 25855 24"
22969 23"
16
www.hossfeldbender.com
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48