HOSSFELD UNIVERSAL
®
Model No. 2 Bender ANGLE IRON
Angle Iron – ASTM A36 Hot Rolled Mild Steel (HRMS)
Vertical Leg Inside Radius (IR) – Radius bends in Angle Iron are measured from the center
of the bend to the inside edge of the vertical leg.
Stock Capacity
Angle Iron .............. 3/16" x 2" x 2" (cold) / 3/8" x 2" x 2" (hot)
30B/31B Angle Iron Dies – “Leg-In”
Bend Angle Iron, Leg-In, As Small As 4" Radius
Without Twisting or Distortion
These dies works on a wedge principle. When bending pressure is
applied, the Inner Radius Block holds the horizontal flange of the stock
in a vise-like grip to prevent crimping or twisting. Tooling consists of a
30B Master Die Assembly and 31B Inner Radius Block of desired
size. Purchase the General Purpose Set, or order parts
individually, as needed.
General Purpose Toolset
General Purpose Toolset for Bending Angle Iron,
Leg-In
30B Master Die Assembly (Master Die, Swing Arms, and stabilizing Prongs)
20780 . . . . . . . . . . . . . . . . . . .108 lbs Gross Weight
31B Inner Radius Block bending Angle Iron, “Leg-In”
This set, also sold on pg. 6, includes the Master Die Assembly and a
set of the most popular sizes of Inner Radius Blocks, conveniently
priced and packaged: 5", 6", 7", 9", 12", 15", 18", 24", 30", and 36"
radii. Included items are starred (*) below.
33B 34B
Master Die Assembly 31B
30B Inbend Master Die Assembly, Complete
20781* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contains the following parts. All parts can be purchased separately.
PART NO. DESCRIPTION
20782 30B Inbend Master Die
20851 32BR Right Holding Arm
20852 32BL Left Holding Arm
30B 32BL 32BR
20859 33B Prong (for Holding Arm) (2)
20865 34B Pin (for Holding Arm) (2)
31B Inner Radius Blocks
PART NO. IR PART NO. IR
20798 4" 20815 19"
20799 4-1/2" 20816 20"
20800* 5" 20818 22"
20801 5-1/2" 20820* 24"
20802* 6" 20822 26"
20803* 7" 20824 28"
20804 8" 20826* 30"
20805* 9" 20827 32"
20806 10" 20828 34"
20807 11" 20829* 36"
20808* 12" 20830 40"
20809 13" 20831 44"
20810 14" 20832 48"
20811* 15" 20833 60"
20812 16" 20834 72"
“S” bend in Angle Iron:
20813 17" 20835 96" “Leg-In” (top) and “Leg-Out” (bottom)
20814* 18" 20836 120"
* Included in 20780 General Purpose Toolset
38
www.hossfeldbender.com
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48