HOSSFELD UNIVERSAL
®
Model No. 2 Bender PIPE
Schedule 40 American Pipe – ASTM A53, Type F, Grade 1020, 45,000 psi Tensile Strength Steel.
Safety Note: Schedule 40 is the MAXIMUM Pipe thickness
Inside Diameter (ID) – Schedule 40 American Pipe is measured by its Inside
that can safely be bent with ALL Pipe Die Sets. Bending
Diameter (ID), e.g., 1" ID.
Center Line Radius (CLR)
thicker stock may result in breakage of die and/or injury.
– Radius bends in Pipe are measured from the center of the bend
to the center line of the Pipe. CLR specifications are for bends made in Pipe.
Final radius dimensions will vary for Copper, Brass, Aluminum or Alloy Steel.
Contact Factory if you have bending jobs requiring other materials.
Stock Capacity CLR
Schedule 40 Pipe and Rigid Conduit ......... 1/4"–2"ID .................Min: 1/4" ID x 2-1/2" CLR Max: 2" ID x 10" CLR
General Purpose Pipe Dies
Form Smooth Radius Bends in Pipe and Rigid
Conduit
These dies offers solutions for bending several sizes of Pipe with a
single setup. They may be a cost-effective solution for fabrication-type
jobs when you need to bend angles, offsets, and return bends for
several jobs – they let you choose your task and quickly set up the
bender to fabricate several different parts. Order the complete
General Purpose Set or individual parts, as needed.
13B8 Pipe Die and 15B2 Grooved Roller bending 1-1/4" Pipe to an
8" radius return bend
General Purpose Set
General Purpose Toolset for Bending Pipe
46001 . . . . . . . . . . . . . . 44 lbs Gross Weight
This set, sold on p. 5, lets you bend several sizes in Pipe with each
15B 14B 13B8 15B2
setup. Bend all sizes of standard Pipe and Rigid Conduit.Form
smooth, even radius bends without flattening the pipe or splitting the
seam. Bend to any degree or to a continuous coil, as desired. The set
includes all the following; dies can be ordered individually.
13B6 13B7 13B4 13B5
Pipe Dies
PART NO. DESCRIPTION SIZE
20075 15B Pipe Die 1/4", 3/8" & 1/2" P
20072 14B Pipe Die 3/4" & 1" P
20069 13B8 Pipe Die 1-1/4" P
20067 13B6 Pipe Die 1-1/2" P
20065 13B4 Pipe Die 2" P
Rollers
PART NO. DESCRIPTION
20076 15B2 V-Grooved Roller for 15B, 14B, 13B8
20068 13B7 Roller for 13B6 (1-1/2")
20066 13B5 Roller for 13B4 (2")
13B4 Pipe Die & 13B5 Roller bending 2" Pipe with hydraulic assist
HOSSFELD UNIVERSAL
®
parts and dies are designed
to be used with HOSSFELD UNIVERSAL
®
Benders. Use
of other benders with HOSSFELD UNIVERSAL
®
parts
and dies may cause inferior performance or lead to breakage of
such parts or dies.
18
www.hossfeldbender.com
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48