HOSSFELD UNIVERSAL
®
Model No. 2 Bender PIPE
Schedule 40 American Pipe – ASTM A53, Type F, Grade 1020, 45,000 psi Tensile Strength Steel.
Inside Diameter (ID)
Safety Note: Schedule 40 is the MAXIMUM Pipe thickness
– Schedule 40 American Pipe is measured by its Inside Diameter
that can safely be bent with ALL Pipe Die Sets. Bending
(ID), e.g., 1" ID.
Center Line Radius (CLR)
thicker stock may result in breakage of die and/or injury.
– Radius bends in Pipe are measured from the center of the bend
to the center line of the Pipe. CLR specifications are for bends made in Pipe. Final radius
dimensions will vary for Copper, Brass, Aluminum or Alloy Steel.
Contact Factory if you have bending jobs requiring other materials.
Stock Maximum Capacity
Schedule 40 Pipe ............................ 1/4" – 2" P
Feed-Along Pipe Die Sets
Make Large-Radius Bends up to 360º in Pipe
Feed-Along Pipe Die Set (Form Die, Back Block, Draw Block) bending
Bend Pipe more than 180°, or bend larger radius sizes than are available with
Pipe to a large radius
“One-Pull” 180° “Wrap-Around” Pipe Dies. Bend 90°, 180°, 270°, 360° or anything in between. Make
U-bends in larger radii, or bend full 360° circles. These dies will bend listed types of Pipe smoothly,
BACK BLOCK DRAW BLOCK
without distortion or surface blemish, and without the use of internal supporting mandrels or filler of
any kind. Add precision-controlled Hydraulic Power for accurate production of quantity parts.
We recommend using Hydraulic Power when bending larger stock sizes, as listed below.
1/4" Pipe 3/4" Pipe (continued )
PART NO. CLR
PART NO. CLR
FORM DIE
31715 5"
33694 54"
33706 60"
1-1/4" Pipe (continued )
3/8" Pipe
33800 120"
PART NO. CLR
PART NO. CLR
34905 36"
32232 6-5/16"
Hydraulic Power recommended
when bending 1"-2" Pipe.
35010 192"
1/2" Pipe
35030 242-1/2"
1" Pipe
PART NO. CLR
35042 297-1/2"
PART NO. CLR
32753 6-3/4"
33958 6"
1-1/2" Pipe
32789 8-1/4"
33999 7"
PART NO. CLR
32807 9"
34030 7-1/2"
35152 8"
32825 9-9/16"
34054 8"
35176 9"
32885 13"
34090 9"
35236 12"
32909 15"
34102 9-1/2"
35284 16"
32944 18"
34126 10-1/2"
35332 20"
32962 19-1/4"
34150 12"
35356 24"
32986 22"
34162 12-3/4"
35374 27"
32992 23"
34168 13"
35459 44"
33034 30"
34180 14"
35471 46"
34192 15"
3/4" Pipe
35485 48"
34276 24"
PART NO. CLR
35494 54"
34312 30"
33313 6"
35510 72"
34342 35"
33336 6-1/2 "
35610 192"
34348 36"
33381 8"
34415 48"
2" Pipe
33404 8-1/2"
34460 96"
PART NO. CLR
33422 9-1/4"
34492 192"
35661** 7"
33428 9-1/2"
35709** 9"
33452 10-1/2" 1-1/4" Pipe
35742 11"
33470 11-1/2" PART NO. CLR
35769 12"
33476 12" 34610 7-1/2"
35781 13"
33488 13" 34637 8"
35799 14-1/2"
33500 14" 34669* 9"
35865 20"
33536 17" 34689* 10"
35991 42"
33542 17-1/2" 34709* 11"
36685 180"
33548 18" 34719* 12"
33572 20"
* Die Set not pictured; comes with Form
34729* 13"
Die and Roller ONLY. Use 20059 12B
33596 24" 34749 15"
Oscillating Block as Back Block, included
33629 30" 34869 30"
with basic 46000 Bender. (Instructions included)
33668 36" 34893 34"
** Die Set not pictured; comes with Form Die,
33681 42"
Back Block, and 20066 13B5 Roller.
33689 48"
20
www.hossfeldbender.com
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48