FLAT AND BAR STOCK HOSSFELD UNIVERSAL
®
Model No. 2 Bender
Inside Radius (IR) – Radius bends in Flat Stock are measured from the center of the bend
to the inside edge of the Stock.
Stock Capacity
Flat ........................................Upto3/8" x 2"
63B “E-Type” Edgebend Clamp Set
Edgebend Heavier Flat Stock to a Larger Radius–
“The Hard Way”
Required tooling consists of a 63B “E-Clamp” Set and a 20B2 Wide,
Flat-Face Radius Block of desired radius size.
63B “E-Type” Edgebend Clamp Set
21201 . . . . . . . . . . . . . . . . . . . . 11 lbs Gross Weight
Clamp set includes one each of Main Frame and Swinging Frame
clamps.
63B “E-Clamp” edgebending heavy Flat stock with a 20B2 Wide,
PART NO. DESCRIPTION
Flat-Face Radius Block
21202 63B-MF Main Frame E-Clamp, Only
21203 63B-SF Swinging Frame E-Clamp, Only
63B “E-CLAMP” SET
20B2 Wide, Flat-Face Radius Blocks
can also be used to bend wide Flat stock
“The Easy Way.” (See pg. 28).
MAIN SWINGING
FRAME FRAME
CLAMP CLAMP
20B2 Wide, Flat-Face Radius Blocks
PART NO. IR PART NO. IR PART NO. IR PART NO. IR
20158 4-1/2" / 5-1/2" 20163 13" / 14" 20177 39" / 40" 20184 228" / 240"
20159 5" / 6" 20164 15" / 18" 20178 42" / 48"
20157 6-1/2" / 7-1/2" 20167 20" / 22" 20180 54" / 60"
20160 7" / 8" 20169 24" / 36" 20202 66" / 72"
20161 9" / 12" 20173 28" / 30" 20203 78" / 84"
20162 10" / 11" 20175 34" / 35" 20183 108" / 120"
HOSSFELD UNIVERSAL
®
parts and dies are designed
to be used with HOSSFELD UNIVERSAL
®
Benders. Use
of other benders with HOSSFELD UNIVERSAL
®
parts
and dies may cause inferior performance or lead to breakage of
180° bend “The Hard Way”
such parts or dies.
Office: (507) 452-2182 Fax: (507) 454-1194
31
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48