PIPE HOSSFELD UNIVERSAL
®
Model No. 2 Bender
Follow all recommendations for the minimum and maximum wall
Safety Note: Hydraulic Power is recommended for
thickness that can be bent with the tooling. Bending stock that is
bending the following sizes: 1" – 2" Schedule Pipe.
too thin or too thick for the desired radius may result in breakage
or distortion of the stock.
180° Pipe Die Sets
Bend Pipe to 180º With “Wrap Around”-Style Dies
Make bends up to 180° in a single operation. These dies will bend listed
types of Schedule 40 Pipe smoothly, without distortion or surface blemish,
and without the use of internal supporting mandrels or filler of any kind.
Add precision-controlled Hydraulic Power for accurate production of
quantity parts. We recommend using Hydraulic Power when bending
larger stock sizes, as listed below.
1" Pipe (continued)
180° Pipe Die Set (Form Die, Back Block, Draw Block) bending Pipe
PART NO. CLR
to a short radius
33981 6-3/4"
33991 7"
3/4" Pipe
34021 7-1/2"
BACK
BLOCK
PART NO. CLR
34046** 8"
33200 2"
34063** 8-1/4"
33206 2-1/4"
34073** 8-1/2"
33212 2-1/2"
DRAW
1-1/4" Pipe
BLOCK
33218 2-3/4"
33224 3"
PART NO. CLR
33236 3-1/2"
34500 3"
34506 3-1/4"
FORM DIE
33250 4"
33264 4-1/2"
34512 3-1/2"
33271 4-3/4"
34518 3-3/4"
1/4" Pipe 33278 5"
34524 4"
PART NO. CLR 33292 5-1/2" 34530 4-1/4"
31625 1-1/4" 33306 6" 34536 4-1/2"
31630 1-1/2" 33319 6-1/4" 34548 5"
31637 1-3/4" 33326 6-1/2" 34560 5-1/2"
31655 2-1/2" 33342 7" 34572 6"
31697 4-1/4" 33361 7-1/2" 34596 7"
33393* 8-1/2"
34630** 8"
3/8" Pipe
PART NO. CLR 1-1/2" Pipe
Hydraulic Power recommended
32100 1-3/8" PART NO. CLR
when bending 1"-2" Pipe.
32105 1-1/2" 35050 4"
32118 1-7/8" 35062 4-1/2"
32148 3"
1" Pipe
35068 4-3/4"
32166 3-3/4" PART NO. CLR 35074 5"
33829 2-1/4"
35086 5-3/8"
1/2" Pipe
33835 2-7/16"
35104 6"
PART NO. CLR
33841 2-1/2"
35116 6-1/2"
32600 1-1/4"
33853 3"
35128 7"
32606 1-1/2"
33859 3-1/8"
32618 2"
33871 3-1/2"
2" Pipe
32630 2-1/2"
33877 3-3/4"
PART NO. CLR
32636 2-5/8"
33883 4"
35630 6"
32648 3"
33890 4-1/16"
32655 3-1/4"
* Die Set not pictured; comes with
33904 4-1/2"
32662 3-1/2"
Form Die, Bolt-on Back Block, and
33911 4-5/8"
2 Rollers. (Instructions included)
32676 4"
33925 5"
** Die set not pictured; comes with Form
32704 5"
33938 5-1/2"
Die and 2 Rollers ONLY. Use 20059 12B
32732 6"
33951 6"
Oscillating Block as Back Block, included
32746 6-1/2"
33971 6-1/2" with Basic 46000 Bender. (Instructions included)
Office: (507) 452-2182 Fax: (507) 454-1194
19
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48