SQUARE TUBE HOSSFELD UNIVERSAL
®
Model No. 2 Bender
Follow all recommendations for the minimum wall thickness that
Safety Note: .134" Wall (10 Gauge) is the maximum wall
can be bent with the tooling. Bending stock that is too thin or too
thickness you can safely bend with ANY of our Tube Die Sets.
thick for the desired radius may result in breakage or distortion ofBending thicker stock may result in breakage of the die
and/or injury. the stock.
180° Sq. Tube Sets continued
Square Tube Draw Blocks Miscellaneous Parts for Square Tube
Draw Blocks can be used with ALL Form Dies
PART NO. DESCRIPTION
.065" Min Wall (16 Gauge)
20049* 9B Flat-Surface Roller
PART NO. SIZE
37894 Sq. Tube Form Die Dowel Pin
37906 1/2" SQ
38675** Sq. Tube Roller
37925 5/8" SQ
37944 3/4" SQ
37963 7/8" SQ
37982** 1" SQ
* Included with basic 46000 Bender package.
38152** 1-1/8" SQ
**Square Tube Draw Blocks require a 20049 9B Flat-Surface
Roller for setup. A 9B is included with the basic 46000
.083" Min Wall (14 Gauge)
Bender package and is also included in each Square Tube Die Set.
PART NO. SIZE In addition, bending 1-1/2" OD x 6" IR or 1" OD – 1-1/2" OD x 7" IR
38171** 1-1/4" SQ requires the 38675 Sq. Tube Roller. When ordering single Draw Blocks,
38209** 1-1/2" SQ
order additional Rollers below. Contact Factory for questions.
154B/155B Feed-Along Square Tube
Die Sets
Make Large-Radius Bends up to 360° in Square Tube
Form larger radius bends in Square Tube. Complete tooling consists of a
155B Master Back Block/Draw Block Set for the Square Tube size and a
154B Crowned Radius Block for the desired radius. Special “crowned”
profile forms the tube smoothly around the bend with only slight longitudinal
crimping along the tube (“crush bend”). Radius blocks have dual faces, so
each block can make two different radius bends.
154B Crowned Radius Block and 155B Back Block/Draw Block Set
bending Square Tube
155B Feed-Along Back/Draw Block Sets
PART NO. SIZE PART NO. SIZE
155B
DRAW
38875 1/2" SQ 38930 1" SQ
BLOCK
38888 5/8" SQ 38944 1-1/8" SQ
38902 3/4" SQ 38958 1-1/4" SQ
155B
38916 7/8" SQ 38986 1-1/2" SQ
BACK
BLOCK
154B 154B Feed-Along "Crowned" Radius Blocks
RADIUS
PART NO. IR PART NO. IR
BLOCK
39010 8" / 11-1/2" 39044 42" / 48"
39012 9" / 12" 39056 54" / 55"
39014 10" / 15" 39062 60" / 72"
39018 14" / 16" 39074 84" / 96"
39020 18" / 20" 39086 108" / 120"
39026 24" / 36" 39110 149" / 150"
HOSSFELD UNIVERSAL
®
parts and dies are 39034 30" / 33"
designed to be used with HOSSFELD UNIVERSAL
®
Benders. Use of other benders with HOSSFELD
154B Crowned Radius Blocks can be used for forming larger
UNIVERSAL
®
parts and dies may cause inferior performance
radius bends in BOTH Square Tube and Rectangular Tube.
or lead to breakage of such parts or dies. (See pg. 37).
Office: (507) 452-2182 Fax: (507) 454-1194
35
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48