HOSSFELD UNIVERSAL
®
Model No. 2 Bender HANDRAIL CAP
Inside Radius (IR) – Radius bends in Handrail are measured from the center point of the bend to
the center of the stock.
Stock Capacity
Handrail .......... Trade sizes of Handrail Cap with assembled Structural Channel
160B Feed-Along Edgebend Die Sets
for Handrail Cap Assembly
Make Larger Edgebends in Molded Handrail
Assemblies
Form larger-radius edgebends in two- or three-piece Handrail
Assemblies. Use Rectangular Tube or Structural Channel and filler
strip as insert; bend assembled handrail as one piece. Tooling consists
of a 160B Form Die for the desired radius and a 160B Master Back
Block Set (for all radius sizes). Radius Blocks have dual faces for
bending two different radii. Bend 1-3/4" or 1-15/16" Molded Iron
Handrail Cap with Assembled Channel from 10" – 116" radius.
160B Form Die, Back Block, and Draw Block edgebending 3-piece Handrail Assembly
(Handrail, Channel, and filler strip)
1-3/4" Handrail Cap Assembly MAIN FRAME
SWING FRAME
BACK BLOCK
160B Back Block Set
BACK BLOCK
WITH ELEVATION
WITHOUT PIN
PART NO. DESCRIPTION
PIN
37207 Back Block Set for ALL radii (Set of 2)
160B Feed-Along Form Dies
PART NO. CLR PART NO. CLR
37210 10" / 11"
37221 32" / 34"
DUAL FACE
37211 12" / 13"
37223 40" / 42"
FORM DIE
37212 14" / 15"
37225 46" / 48"
37213 16" / 17"
37228 56" / 58"
37214 18" / 19"
37235 82" / 84"
37215 20" / 21"
37240 106" / 108"
37216 22" / 23"
37242 114" / 116"
37217 24" / 25"
1-15/16" Handrail Cap Assembly
Back Block Set
PART NO. DESCRIPTION
37325 Back Block Set for ALL radii (Set of 2)
Feed-Along Form Dies
PART NO. CLR
37328 10" / 11"
37343 40" / 41"
Radius bends in Handrail assemblies
44
www.hossfeldbender.com
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48