HOSSFELD UNIVERSAL
®
Model No. 2 Bender STRUCTURAL FORMS
Outside Radius (OR) – Radius bends in Structural Channel are measured from the center point
of the bend to the outside edge of the stock.
Inner Radius (IR) – Stem-In radius bends in T-Iron are measured from the center point
of the bend to the inside of the “T” bar.
Stock Maximum Capacity
Structural Channel .................................... 2"x1"x3/16"
20B3 Feed-Along Structural Channel
Dies – “Leg-In”
Your Solution for Bending Structural Channel
Bend standard Structural Channel, “Leg-In”, in large radius sizes
using feed-along dies that let you bend up to 360°.
20B3 FORM DIE
PART NO. OR
20189 11-1/2"
20190 14-1/2"
20191 17-1/2"
20192 20-1/2"
20193 23-1/2"
20194 26-1/2"
20195 29-1/2"
20196 32-1/2"
20199 33-1/2"
20197 35-1/2"
20198 38-1/2"
Stock Maximum Capacity
106B MASTERT-Iron ....................................... 3/16" x 1-1/2" x 1-1/2"
DIE
106B T-Iron Die Sets – “Stem-In”
Bend Structural T-Iron Up to 360°
Required tooling consists of a 106B Master Die and a Block Set
consisting of two Radius Blocks. Use two 20054 11B Square Blocks
as Back Block and Draw Block (included with basic 46000 Bender
package).
RADIUS BLOCKS
106B Master Die
PART NO. DESCRIPTION
37591 106B T-Iron Master Die
T-Iron, Stem-In, Radius Block Sets (Set of 2)
PART NO. IR PART NO. IR
37592 9" 37622 18"
37597 10" 37629 20"
37600 11" 37641 24"
37603 12" 37661 30"
37606 13" 37681 36"
37609 14" 37721 48"
37612 15" 37741 60"
37615 16" HOSSFELD UNIVERSAL
®
parts and dies are
designed to be used with HOSSFELD UNIVERSAL
®
Benders. Use of other benders with HOSSFELD
UNIVERSAL
®
parts and dies may cause inferior performance
or lead to breakage of such parts or dies.
46
www.hossfeldbender.com
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48