OD TUBE HOSSFELD UNIVERSAL
®
Model No. 2 Bender
Round OD Tube – All specifications refer to Electric Resistance Welded (ERW), cold drawn
Safety Note: .134" Wall (10 Gauge) is the maximum wall
over mandrel (DOM), Mechanical ASTM A36 Hot Rolled Mild Steel (HRMS) Tube.
thickness you can safely bend with ANY of our OD Tube Die
Outside Diameter (OD) – Round OD Tube is measured by its Outside Diameter, e.g., 1" OD.
Sets. Bending thicker stock may result in breakage of the die
Center Line Radius (CLR) – Radius bends in OD Tube are measured from the center of the bend
and/or injury. to the center line of the tube. CLR sizes are for bends made in Round OD Tube. Final radius
dimensions will vary for Copper, Brass, Aluminum or Alloy Steel.
Contact Factory if you have bending jobs requiring other materials.
Stock Capacity Maximum Wall
Round OD Tube ...... 3/8"–2"OD ................... .134" (10 Gauge)
180° OD Tube Die Sets
Bend OD Tube to 180° With “Wrap-Around” –
Style Dies
Form small-radius bends up to 180° with “One-Pull.” These dies will
bend listed types of Round OD Tube smoothly, without distortion or
surface blemish, and without the use of internal supporting mandrels
or any kind of filler. Add precision-controlled Hydraulic Power for
accurate production of quantity parts. We recommend using Hydraulic
Power when bending larger stock sizes, listed below.
180° OD Tube Die Set (Form Die, Back Block, Draw Block) bending OD Tube
to a small radius
3/8" OD 5/8" OD
DRAW BLOCK .049" Min Wall (18 Gauge) .065" Min Wall (16 Gauge)
PART NO. CLR PART NO. CLR
21454 1-1/4" 22100 1-1/2"
21460 1-1/2" 22105 1-3/4"
21480 2-1/4" 22110 1-13/16"
BACK 21521 4" 22116 2"
BLOCK
21558 6-1/4"
.049" Min Wall (18 Gauge)
21606 8"
PART NO. CLR
1/2" OD
22121 2-1/4"
.065" Min Wall (16 Gauge)
22126 2-3/8"
PART NO. CLR 22131 2-1/2"
21645 1-1/4" 22137 2-3/4"
22143 3"
.049" Min Wall (18 Gauge)
22148 3-1/4"
PART NO. CLR 22158 3-5/8"
21650 1-1/2" 22169 4"
FORM DIE
21655 1-3/4" 22181 4-1/2"
21660 2" 22193 5"
21672 2-1/2" 22217 6"
HOSSFELD UNIVERSAL
®
parts and
21683 3" 22251 7-3/16"
dies are designed to be used with
21688 3-1/4" 22274 8"
HOSSFELD UNIVERSAL
®
Benders.
21705 4"
Use of other benders with HOSSFELD
21729 5"
UNIVERSAL
®
parts and dies may cause
inferior performance or lead to breakage of
such parts or dies.
OD Tube continued on
next page
Office: (507) 452-2182 Fax: (507) 454-1194
13
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48