Hossfeld Universal | Model No. 2 Bender

FLAT AND BAR STOCK HOSSFELD UNIVERSAL
®
Model No. 2 Bender
Bar Stock – ASTM A36 Hot Rolled Mild Steel (HRMS).
Re-bar – Trade sizes of Reinforcing Bar.
Flat Stock – ASTM A36 Hot Rolled Mild Steel (HRMS).
Stock Capacity
Bar....................................Upto1-1/4" dia. cold
Re-bar ....................................Upto1"Grade 40
Flat ......Upto1/2" x 1-3/4" (Cast cams); 1/2" x 4-1/2" (Steel Cams)
20B8
20B8 Self-Locking Cast Cams for Re-Bar
20B8 Cast Cam mounted on 20B
Center Pin forming large-diameter
Make Uniform Leg U-Bends in Re-Bar and Bar
U-bend in Re-bar
Stock up to 11-1/2" Diameter
Form bends in Bar Stock or Reinforcing Bar up to 180°. Also bend
Flat stock. These general purpose Cast Cams will form large-
diameter, uniform-leg U-bends, 90° bends, 180° bends, and anything
in-between. Self-locking cam shape grabs stock and holds it to
prevent slippage – so you’ll get uniform legs every time. Ideal for
bending Re-Bar including “bent anchor bolts” for reinforcing jobs.
Easy to bend fill-in mat and saddles as needed on the job. The are
sturdy dies for a wide range of radius sizes from 2-1/2" up to 11-1/2"
diameter. Cam face is 1-3/4" tall.
PART NO. DIA. PART NO. DIA. PART NO. DIA. PART NO. DIA.
20357 2-1/2 " 20367 5" 20377 7-1/2" 20387 10"
20358 2-3/4" 20368 5-1/4" 20378 7-3/4" 20388 10-1/4"
20359 3" 20369 5-1/2" 20379 8" 20389 10-1/2"
20360 3-1/4" 20370 5-3/4" 20380 8-1/4" 20390 10-3/4"
20361 3-1/2" 20371 6" 20381 8-1/2" 20391 11"
20362 3-3/4" 20372 6-1/4" 20382 8-3/4" 20392 11-1/4"
20363 4" 20373 6-1/2" 20383 9" 20393 11-1/2"
20364 4-1/4" 20374 6-3/4" 20384 9-1/4"
20365 4-1/2" 20375 7" 20385 9-1/2"
20366 4-3/4" 20376 7-1/4" 20386 9-3/4"
20B8 Steel Cam mounted on 20B
20B8 Self-Locking Steel Cams
Center Pin forming small-diameter
Bend Heavy Steel and Re-Bar to Small
U-bend in Re-bar
Diameters With Durable Steel Cams
Steel Cams are heat-treated to withstand heavier stock. Form small-
diameter U-bends in steel or heavier stock like Re-bar. These cams
20B8
will bend from 1-1/2" to 4-1/2" diameter and are excellent for making
close return-bends down to a small diameter. Cam face is 4-1/2" tall.
PART NO. DIA. PART NO. DIA. PART NO. DIA. PART NO. DIA.
20421 1-1/2" 20447 2-1/4" 20471 3" 20495 3-3/4"
20425 1-9/16" 20449 2-5/16" 20473 3-1/16" 20497 3-13/16"
20427 1-5/8" 20451 2-3/8" 20475 3-1/8" 20499 3-7/8"
20429 1-11/16" 20453 2-7/16" 20477 3-3/16" 20501 3-15/16"
20431 1-3/4" 20455 2-1/2" 20479 3-1/4" 20503 4"
20433 1-13/16" 20457 2-9/16" 20481 3-5/16" 20505 4-1/16"
20435 1-7/8" 20459 2-5/8" 20483 3-3/8" 20507 4-1/8"
20437 1-5/16" 20461 2-11/16" 20485 3-7/16" 20509 4-3/16"
20439 2" 20463 2-3/4" 20487 3-1/2" 20511 4-1/4"
20441 2-1/16" 20465 2-13/16" 20489 3-9/16" 20513 4-5/16"
20443 2-1/8" 20467 2-7/8" 20491 3-5/8" 20515 4-3/8"
20445 2-3/16" 20469 2-15/16" 20493 3-11/16" 20517 4-7/16"
20519 4-1/2"
Office: (507) 452-2182 Fax: (507) 454-1194
29
Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10 | Page 11 | Page 12 | Page 13 | Page 14 | Page 15 | Page 16 | Page 17 | Page 18 | Page 19 | Page 20 | Page 21 | Page 22 | Page 23 | Page 24 | Page 25 | Page 26 | Page 27 | Page 28 | Page 29 | Page 30 | Page 31 | Page 32 | Page 33 | Page 34 | Page 35 | Page 36 | Page 37 | Page 38 | Page 39 | Page 40 | Page 41 | Page 42 | Page 43 | Page 44 | Page 45 | Page 46 | Page 47 | Page 48