August, 2016
www.us-tech.com Heraeus Presents Technology and Process to Create Foldable Touch Panels
Conshohocken, PA — Heraeus has launched a new dry-film resist photolithography fine patterning process for conductive polymer films and is able to use rapid-curing infrared (IR) to create flexible touchscreen displays. The development is a product of a collaboration between Heraeus and Taiwan’s Industrial Technology Research Institue (ITRI). High-resolution patterning of touch sensors is a pre- requisite for advanced touch panels, especially for flexible and foldable touch displays. The company has demonstrated the process by patterning Clevios conductive polymer films by DFR photolithography. With this process, line widths of 50 µm reso-
lution and smaller can be achieved easily. Parameter sets and process windows for the entire process chain of Clevios touch panel manufactur- ing are now available for customers to implement in their productions. Clevios films and sensors easily with- stand more than 300,000 bends at bending radii as low as 1 mm (0.039 in.) without degradation. The company has also created a flexible 7 in. (177.8 mm) Clevios con-
Measurement Acton, MA — CAMI Research, a provider of cable and harness test sys- tems, has reported that a customer has successfully tested simultaneous, multipoint continuity in a 2 mile (3.22 km) multicore cable rated at 10W/1,000 ft, using a CableEye M3UH tester. Priced in the low thousands
CAMI Reports Milestone Continuity
Infrared curing for flexible polyimide substrates.
ductive polymer touch panel based on an ultra-thin flexible polyimide substrate. Heraeus uses a cus- tomized, rapid IR curing process for fast, efficient curing of polyimide substrate films. Infrared emit- ters transfer heat without contact and at high effi- ciency. Compared with conventional hot air ovens curing processes can take a few minutes rather than hours. In addition, without air movement any con- tamination is minimized. Infrared emitters that match exactly to the absorption wavelength of the material can heat up much faster. Medium-wave carbon emitters meet the absorption spectrum of
polyimide, which enables rapid IR curing/drying. Contact: Heraeus, Inc., 24 Union Hill Road, Conshohocken, PA 19428 % 610-825-6050 fax: 610-825-7061 Web:
www.heraeus.com
Page 73
Taking X-ray inspection to the highest level
range, this sort of test has been gen- erally carried out by much more expensive equipment. New to the product line in 2015, the M3UH con- tinuity tester offers a down-shifted resistance threshold (0.1W to 5 MW ±0.1W) compared with that of the M3U. However, the M3U is similar
See the Quadra™ in action
7
Nepcon South China Booth # 1H20
The New Quadra Series ™
With its in-house, proprietary QuadraNT™ tube, Aspire FP™ detector, Gensys™ inspectioninspection software and QuadraGen™ power supply Nordson DAGE brings you the future ofure of X-ray image resolution, reliability, performance and throughput.
Two-mile-long cable multipoint continuity tested rated at 10W/1,000 ft.
enough to be able to carry out the same test successfully. All CableEye models, including
HiPot, have out-of-the-box options to adjust dwell time to compensate for inherent cable capacitance, thus enabling measurement of long cables. Some applications of the technology including testing in the oil, gas and renewable energies industries, com- mercial building wiring installations, submarine applications, entertain-
ment, and many others. Contact: CAMI Research, Inc.,
42 Nagog Park, Suite 115, Acton, MA 01720 % 978-266-2655 E-mail:
info@camiresearch.com Web:
www.camiresearch.com
Learn more:
www.nordsondage.com/quadra
The new Quadra 7™ is equipped with two 4K UHD displays. That’s 8 million pixels utilizing the 50µm pixel pitch and 6.7MP image size of the Aspire FP™ detector. This offers up to 4 times the detail compared to standard systems and supports 68,000X total magnification.
Benefit from confidence in your product quality, peace of mind in operation and knowing you are working with the future of X-ray imaging. Get unbeatable image quality in the shortest possible time and with the highest feature recognition at full power.
and mage n at full power The New QuadraTM Series from Nordson DAGE. Scaling new heights in X-ray technology.
The unbeatable Manual X-ray Inspection System ys
See at NEPCON South China, Booth 1H20
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88