Page 72
www.us-
tech.com
inTEST Thermal Launches Benchtop IC Temp Testing
Mansfield, MA — inTEST Thermal Solutions has introduced two bench- top systems for temperature testing integrated circuits, including high- watt emitting devices. The Temp tronic® ThermoSpot®
consists of a highly responsive bench- top temperature-forcing unit that
in-circuit and test socket applications. Connecting the thermal head to the DUT is made easy and precise through a quick lock-down mechanism on the thermal head. Two models, DCP-1 and DCP-2,
span a temperature range from –65 to +200°C. The DCP-1 provides cooling power of 25W at –40°C for lower power devices, while the DCP-2 provides a capacity to cool 55W at –55°C and 120W at –40°C. A touch-screen controller
Temperature tester attaches to DUT.
feeds a thermal probe head through a flexible umbilical. The thermal probe is designed
with an interchangeable Thermo - Bridge™ to mate directly to an IC or other device under test creating a highly efficient thermally conductive path to quickly induce temperatures to the device, even under power. Interfacing to the DUT is available for
LEADERS IN
MICRO DISPENSING TECHNOLOGY
SMALL REPEATABLE VOLUMES ARE A CHALLENGE, BUT NOT IMPOSSIBLE IF YOU HAVE BEEN CREATING THEM AS LONG AS WE HAVE.
G
permits user-programmable temperatures, graphing, and data logging. Using DUT con- trol, with a thermocouple or diode, the system provides fast and precise transitions to temperature at the IC. The iTS family includes
three temperature-related cor -
porations, Sigma Systems, Temp - tronic and Thermonics. iTS is the Thermal Products Segment of in - TEST Corp., Mount Laurel, New
Jersey, USA. Contact: inTEST Thermal Solutions, 41 Hampden Rd.,
Mansfield, MA 02048 % 781-688-2300 Web:
www.inTESTthermal.com
Brush-type DC motor.
make it especially suitable for portable equipment and power tools. The motor body cross section
measures a compact 25 x 32mm. It is available in three motor lengths with continuous torque from 0.027 to 0.034Nm. The DC032A series has a maximum speed of 6500 rpm and can be used with DC bus voltages up to 48VDC. There are 8 standard wind- ing variations to suit almost every project. Custom windings are avail-
preloaded for low vibration and quiet operation. The motors are available with optional Pittman G35A gearboxes
and H- type incremental encoders. Contact: Pittman Motors, 343
Godshall Drive, Harleysville, PA 19438 % 267-933-2105 fax: 215-256- 1338 Engineering: % 267-933-2105 E- mail: info.pittman-motors@
ametek.com Web: www.Pittman-
Motors.com
August, 2015
Harleysville, PA — Pittman® Motors, a business unit of AMETEK Precision Motion Control, has intro- duced the DC032A Series of brush DC motors, the latest addition to its broad range of DC brush and brush- less motors. The new product is a high torque density motor designed in a rectangular package. Its com- pact size and high power density
Pittman Intros Line of Brush DC Motors
able to further maximize exacting end-product
requirements. The
motor construction uses a high-ener- gy, 4-pole stator with rare earth mag- nets. The 13 slot commutation design minimizes torque ripple. The arma- ture slots are skewed for optimum reduction of reluctance torque (LO- COG®). The motor shaft is supported by shielded ball bearings that are
TO DO IT WELL, WE PROVIDE THREE THINGS: REE THINGS
Dispensing Expertise in a variety of microelectronic packaging applications.
Feasibility Testing & Process Verification based on years of product engineering, material flow testing and software control.
Product Development for patented valves, dispensing cartridges, needles and accessories.
Our Micro Dispensing product line is proven and trusted by manufacturers in semiconductor, electronics assembly, medical device and electro-mechanical assembly the world over.
DL Technology
216 River Street, Haverhill, MA 01832 P: 978.374.6451 | F: 978.372.4889
info@dltechnology.com
dltechnology.com
RoHS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88