82 MICROSCOPY
New developments in LED illumination systems
Jim Beacher discusses the benefits of illumination systems that utilise the latest LED technology.
R
ecent developments in LED technology have resulted in illumination
systems offering increased brightness across a very wide spectral band from the visible to the near-infrared (NIR).
A particular example is in microscope illumination and, in particular, for the fluorescence technique that is now widely used in life sciences and materials research. As well as requiring intensities at multiple defined wavelengths, these systems also require precise intensity control, with the ability to switch on and off quickly and repeatedly.
Te goal of technology providers was to provide a high level of intensity from the mid-300nm region to the 700-800nm region. Work to address these joint needs of brightness and control has resulted in the development of a universal fluorescence illumination system from CoolLed, the pE-4000, which has
16 selectable LED wavelengths. Tis was considered adequate to satisfy almost all known applications and offer intensities in the NIR, where there is increased interest for in-vivo and optogenetic applications. Provision for subsequently incorporating lower wavelengths (such as 340nm, which requires the use of special optical materials that transmit at UV wavelengths) was taken into account.
To offer a system with extensive functionality such as stability, fast switching speeds and the ability to generate sinusoidal and square-wave functions, software communication via USB and TTL triggering via multiple BNC connections were incorporated. Te ability to trigger in, trigger out and operate under analogue control was incorporated. Switching speeds under TTL are in microseconds (see Fig. 1.)
A challenge in developing a system with a wide spectrum of illumination is that losses incurred when combining LED light of different wavelengths can quickly compound and render the overall system performance unacceptable. To address this, the developers investigated how
Fig. 1. LED switching speeds under TTL trigger are in microseconds, making this solution an attractive option for end users.
the microscopist would use the illumination system. It was recognised that illumination would be passed through optical filter sets installed within the microscope. Tese filters limit the wavelengths of light that will be transmitted.
As the filter sets are commercially available, it was possible to characterise their transmission wavelengths and group their performance into four bands of mutually exclusive wavelengths. Four motor-driven LED modules were then designed, each supporting the necessary wavelengths for each band.
As the optical path will require fewer combining optics, losses are dramatically reduced. Te overall physical and environmental footprint of the system is reduced.
Achieving the intensities required for fluorescence microscopy requires the correct selection of the bare LED die to ensure that the wavelength peak is correctly positioned to match both the
Fig. 2. CoolLED wavelength grouping concept.
www.scientistlive.com
filter set and the absorption characteristic of the fluorophores. Active air-cooling technology ensures that the LED is held at a constant temperature. Te LEDs can be over-driven for greater intensity without causing damage. Cooling increases useable lifetime and ensures that output remains stable.
LED semiconductor technology produces LEDs that have their peak intensities in either the blue or red regions of the spectrum. Phosphor technology has enhanced LED illumination systems by increasing intensity in the green region. A phosphor that is excited by a powerful LED peak can be selected, which emits at a wavelength where bare LEDs are weaker.
Te design of the pE-4000 has resulted in an intense, controllable and broad-spectrum illumination system that can be operated as a simple white light source or as an advanced research tool depending on the user’s requirements.
For more information ✔ at
www.scientistlive.com/eurolab
Jim Beacher is business director at CoolLed in Andover, UK.
www.coolled.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120