This page contains a Flash digital edition of a book.
ANALYTICAL AND LABORATORY EQUIPMENT 41


How RFID labels are integrated into plastics


New possibilities now exist in the realm of seamless traceability, especially in lab automation and diagnostics. In automated storage systems, it is necessary to give a sample more identification than a simple number. In the future, data matrix- or barcodes will not be able to cover applications where more data and adding/modifying data are required, and where traceability over the entire life cycle of the item must fulfil stricter quality standards. New RFID tags can establish, for instance, the


point when a sample was in a certain room and the environment in that room. These abilities make a replacement of data matrix- and barcodes with RFID quite interesting. RFID tags can also be positioned at any place on an article, or partially or fully integrated in plastics. The most common process to


Reagent tracing in tubes using small RFID tags (<5 mm).


produce plastic disposable diagnostic and labware items is injection moulding. There are several options for integrating RFIDs into moulded parts. Wet labels are the simplest; these are tags on an adhesive foil, handled as common labels. However, this quickly reaches its feasibility limits regarding positioning, size and protection from manipulation; it is difficult to apply labels on uneven surfaces, radii or curves, and they are exposed and can be damaged


by mechanical, environmental or other influences. These problems are eliminated if the tag becomes integrated into plastic during the manufacturing process. Based on a process developed at Wedimann Plastics Technology, these tags can now be partially or fully integrated into plastic. If RFID-inlays are used (a tag on


dry foil), the material properties of the foil as well as of the processed plastic must be considered, and the foil possibly plasma-treated or coated. For a cost-effective integration of RFID- tags, however, additional process steps should be avoided; whenever possible, tags should be used as delivered by their manufacturer. Therefore, the requirements for the tags must be carefully analysed and established, and a decision made as to whether the tag is to be fully or only partially integrated in plastic. For partial integration, the


Weidmann Inmold Process is similar to the commonly used ‘in-mould labelling’


(IML). For RFID, however, the sensitive electronics are protected by a melt- flow system specially conceived for this purpose. For tags to be completely integrated into plastic, the process becomes two-staged. Once a first layer is injected over the tag, a second layer must be injected on the opposite side. A clear distinction must therefore be


drawn between completely or partially embedded tags, and the decision on which to use must be carefully evaluated. The more complex process can only be justified for articles with a long life cycle, for example items that must be autoclaved or are exposed to aggressive environments. For more common usage, the properties of partially integrated tags may be entirely adequate, since a certain level of manipulation protection is assured.


For more information ✔ at www.scientistlive.com/eurolab For more information visit www.weidmann-medical.com


Get a fresh perspective on a business challenge


Looking for cutting edge expertise and facilities to solve a company challenge?


Contact the Commercial Relations team at The University of Edinburgh and grasp the myriad of opportunities available to your company in the fields of Industrial Biotechnology, Big Data, Sensors, Modelling & Simulation, Energy and Imaging.


Contact the team at: crm@ed.ac.uk or 0131 650 9090 www.research-innovation.ed.ac.uk


Lab image courtesy of Peter Tuffy Photography The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336.


For more information ✔ at www.scientistlive.com/eurolab


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120