Solar ♦ news digest
Foundation, an organisation dedicated to enabling microenterprise development in rural communities.
Gay began the early part of his career working for ARCO Solar where he forged the transition of single crystalline silicon from R&D to mass production. In 1994, he was elected director of NREL where he managed an annual budget of more than $235 million, with a staff of more than 1,000 employees. After his tenure at NREL, he served as president of ASE Americas.
From 2001 to 2005, Gay served as chairman of the SunPower Advisory Board. He then joined Applied Materials in 2006 as corporate vice president and general manager of the Solar Business Group. He was named president of Applied Solar and chairman of the Applied Solar Council in 2009.
“I am honoured to join such an experienced team with Beck, Noufi, and Benner,” says Gay. “Collectively, they represent one of the most experienced groups ever assembled for CIGS technology and high volume manufacturing.”
Novel solar cell technology handles the blues
A new technology enables the capture of high-energy photons more efficiently in CIS solar cells
Getting the blues is rarely a desirable experience - unless you’re a solar cell, that is.
Scientists have together developed a new, inexpensive material that has the potential to capture and convert solar energy - particularly from the bluer part of the spectrum - much more efficiently than ever before.
The researchers are from the U.S. Department of Energy’s Argonne National Laboratory and the University of Texas at Austin.
electromagnetic spectrum inefficiently. This is because blue photons - incoming particles of light that strike the solar cell - actually have excess energy that a conventional solar cell can’t capture
“Photons of different energies kick electrons up by different amounts,” says Brian Korgel, a professor at the University of Texas. “Some photons come in with more energy than the cell is optimised to handle, and so a lot of that energy is lost as heat.”
Because of this limitation, scientists had originally believed that simple solar cells would never be able to convert more than about 34 percent of incoming solar radiation to electricity.
However, about a decade ago, researchers saw the potential for a single high-energy photon to stimulate multiple ‘excitons’ (pairs of an electron and a positively- charged partner called a ‘hole’) instead of just one. “This was a very exciting discovery, but we were still sceptical that we could get the electrons out of the material,” Korgel says.
In their study, Korgel and his team used specialised spectroscopic equipment at Argonne’s Centre for Nanoscale Materials to look at multi-exciton generation in copper indium selenide (CIS), a material closely related to another more commonly produced thin film that holds the record for the most efficient thin-film semiconductor.”
This is one of the first studies done of multiple exciton generation in such a familiar and inexpensive material,” notes Argonne nanoscientist Richard Schaller. “Argonne’s spectroscopic techniques played a critical role in the detection of the multi-excitons,”
Korgel notes. “These kinds of measurements can’t be made many places.”
In order to deposit thin films of the nanocrystalline material, the researchers used a process known as ‘photonic curing’, which involves the split-second heating up and cooling down of the top layer of the material. This curing process not only prevents the melting of the glass that contains the nanocrystals, but also vaporises organic molecules that inhibit multiple exciton extraction.
Although the study mostly proves that the efficiency boost provided by multiple exciton extraction is possible in mass-producible materials, the major hurdle will be to incorporate these materials into actual real-world devices.
Most simple solar cells handle the bluish hues of the
“The holy grail of our research is not necessarily to boost efficiencies as high as they can theoretically go, but rather to combine increases in efficiency to the kind of large-scale roll-to-roll printing or processing technologies
March 2014
www.compoundsemiconductor.net 133
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164