Page 94
www.us-tech.com
July, 2012
Camarillo, CA — Binder-USA has introduced the most recent addition of molded eight-pin cordsets to the M8 sensor connector range. The new cordset is a response to the high demand for smaller connectors that can transmit the maximum amount of signals possible. With the new M8 cordset it is possible to transmit up to 8 signals from a connector that is only 9.7mm in diameter. The M8 con- nectors are especially well suited for actuator or sensor applications in the automation industry. The cordsets have an open cable
Binder-USA Introduces New Molded Eight-Pin M8 Cordsets
end with cables available in poly - vinyl chloride (PVC) or polyure thane (PUR), which have a cross-section of 0.25 mm} (24 AWG) and are offered in standard 2-, 5- or 10-meter lengths. Custom wire sizes, lengths and materials are available upon request. All versions are IP 67 rated
Eight-pin cordsets.
when fully mated to their connect- ing parts. Contact: Binder-USA, 3903 Calle Tecate, Camarillo, CA 93012 % 805-437-9925 fax: 805-504- 9656 E-mail:
sales@binder-usa.com Web: http//
www.binder-usa.com
Anderson Introduces Touch-Safe Connectors
Sterling, MA — Anderson Power Products (APP) has launched its Saf- D-Grid connector system for use in the direct connection of DC electron- ic devices to a DC micro grid. The new connector system is
suitable for use in DC servers or any device connecting directly to renew- able energy sources such as solar or wind power.
Planned sessions include the following topics:
Power connectors prevent arcing.
The Saf-D-Grid connector sys-
tem meets international safety requirements for low voltage applica- tions to 400VDC including UL950 and IEC60950. The low profile panel receptacle is designed to fit the stan- dard panel cutout for IEC320 C14 outlets while providing touch-safe connections up to 20A at 600VDC. The connectors are hot-plug rated up to 700A in-rush current at 400V and shield the user from arc flash during un-mating.
Additional safety features
include a first mate, last break con- tact to provide ground and an inte- gral latch to prevent connectors from accidental unmating. The rugged polycarbonate housings are UL94 V- 0 rated and plug power cords, over- molded to provide both strain relief during mating and unmating, are available in 2, 3, and 5 meter lengths in both single-and double-ended styles.
Contact: Anderson Power Products., Inc. 13 Pratts Junction
Road, Sterling, MA 01564-2305 % 978-422-3600 fax: 978-422-3700 E-mail:
marketing@andersonpower.com Web:
www.andersonpower.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104