July, 2012
www.us-tech.com
Applied Motion Integrates Steppers and Drives
Watsonville, CA — New from Applied Motion Products, Inc. are its STM17R and STM23R drive+motors, the newest members of its line of integrat- ed steppers. The STM17R integrates a NEMA 17-step motor and a micro - stepping drive into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions. The STM23R does the same with a NEMA 23 step motor and
a 1000-line, incremental encoder assembled to the rear shaft of the unit, and used for position and veloc- ity verification. The STM17R provides up to 68
oz-in. of torque and can be powered from 24 to 48VDC. The STM23R pro- vides up to 210 oz-in. of torque and can be powered from 12 to 70VDC. All STM models are CE certified and
RoHS compliant. Contact: Applied Motion
Products, 404 Westridge Drive,
Watsonville, CA 95076 % 800-525-1609 or 831-761-6555 E-mail:
sales@applied-motion.com Web:
www.applied-motion.com
Integrated stepper motors.
a microstepping drive. The “R” desig- nation in the part number identifies each model as a step & direction-only unit, a feature that promises the best price in an integrated stepper for those applications requiring basic step and direction control. Setup of each drive+motor —
including running current, idle cur- rent, microstep resolution, load iner- tia ratio (for peak smoothness), and pulse signal type (pulse-direction or pulse-pulse) — is managed by two banks of dip switches on the drive enclosure. No software downloads are required for configuration. All STM17R and STM23R inte-
grated steppers come with three dig- ital inputs (step/pulse, direction/ pulse, enable) and one digital output (fault), all compatible with 5 to 24VDC. They are available in single- shaft, double-shaft, and double-shaft with encoder models. Each double shaft with encoder model comes with
1000VDC Surge Protector From Automation
Systems Mechanicsburg, PA — Automation Systems Interconnect Inc. has released its UL1449 3rd Edition Recognized 1000VDC Surge Protection Device. The DIN Rail- mountable, pluggable module has a max discharge current (8/20) 50kA. The nominal discharge current (8/20) is 20kA. The SPD uses patent-pend- ing MOV technology with high ener- gy thermal protection to provide reli- able surge protection. The device is designed to extinguish the arc inter- nally to give a quick thermal response and device cutoff.
Page 89
New Crystek VCO for Communications
Fort Myers, FL — Crystek’s CVCO55CC-2558-2575 VCO (Voltage Controlled Oscillator) oper- ates from 2558MHz to 2575MHz with a control voltage range of 0.3V to 4.7V. This VCO has a typical phase noise of –120dBc/Hz at 10kHz offset and has excellent linearity. Output power is typically +8dBm. Engineered and manufactured
in the USA, the model CVCO55CC- 2558-2575 is packaged in the indus- try-standard 0.5 x 0.5-in. (12.7 x 12.7mm) SMD package. Input volt- age is 8V, with a max. current con-
sumption of 29mA. Pulling and Pushing are minimized to 2.0MHz and 0.2MHz/V, respectively. Second harmonic suppression is –15dBc typ- ical. The VCO is suitable for use in applications such as digital radio equipment, fixed wireless access, satellite communications systems,
and base stations. Contact: Crystek Corporation,
12730 Commonwealth Drive, Ft. Myers, FL 33913 % 800-237-3061 or 239-561-3311 fax: 239-561-1025; E-mail:
sales@crystek.com; Web:
www.crystek.com.
DIN rail-mountable surge protection module.
Contact: Automation Systems Interconnect, Inc., P.O. Box 1340,
Mechanicsburg, PA 17055 % 877-650-5160 fax: 717-249-5542 E-Mail:
info@asi-ez.com Web:
www.asi-ez.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104