Made of ceramic (unglazed) and approx. 4" in diameter and used with a Borax Bar or cone and water to form a paste. due to the ceramic texture, when the bar is moved in a circular motion on the botom of the dish, fine deposits of the bar are left in the water, thus forming a flux paste. Can also be used to mix other fluxes. Always ensure the dish is clean - any 'foreign' sub- stances mixed with the flux may affect the soldering process.
999 AAI Price/£: 4.75 A. Borax Bar & Cone
Borax bars are made from compact, dried flux and are used with water to create a paste, suitable for soldering precious and non-precious metals. Pour a small amount of water into a Borax dish (999 AAi) and grind the bar with slight pressure to form your paste (the paste should be a dense consistency for it to be effective on your solder join). simply brush the paste onto your join using a Flux Brush (946 010) along with your required solder and you're ready to go!
CodE A. 998 098E B. 998 0981 dEsCriPTioN PriCE/£
Bar 81 x 29 x 29mm 5.25 Cone 114 x 45mm
C. Butane Fuel Butane Lighter Fuel for Hand Held Torches 999 958
Price/£: 3.89
Deoxidising Flux CodE
D. PZZ 090
some items on this page are classed as hazardous material and as such can only be sent by courier or collected in one of our counters
BEST SELLER
24.74
NEW C. B.
dEsCriPTioN Argotect - 500g
Provides standard silver with protection against fire stain when annealing and soldering.
998 116 Borax Powder - 1 Kg E. Tenacity No. 5 Powder, 250g
• This flux overlaps with Easy-Flo but is better suited when prolonged heating is necessary • its disadvantage is a glassy residue which is insoluble in water and must be removed using caustic soda or mechanical methods • Needs to be mixed to a paste with water
PZZ 050 Price/£: 19.94 F. F. Easy-Flo Flux Powder
• This flux is suitable for low temperature soldering • The powder is mixed with water to form a paste. This can then be added to the paste created by a borax cone to aid the flow of solder • residue is removed in hot water
