place your clay at the bottom of the pot, before placing the vented insert over the clay, make sure that the clay does not touch the vents. dampen one of the two sponges provided before placing over the vents, and close the lid. Your clay will remain at an ideal consistency and ready to work when removed. For prolonged storage, check every so often to ensure the sponge does not dry out. the sponge should be damp, but not dripping wet.
This is fabulous. Love it. Does what it says. Margaret
Silver Clay Moisturising and Storage Pot
keep your silver clays fresh with this silver clay Moisturising and storage pot! this clever little storage solution keeps your silver clay ready to use by conserving its moisture, as well as providing a safe, dedicated storage place for your unworked clay. please note that this pot is for use with silver clays only - not for use with Bronze or copper clays.
855 091 price/£: 9.49
Wood Clay Powder
the prometheus Wood clay powder has been made from a special formula that burns clean and leaves hardly any residue. 700 558
price/£: 8.97 ON THE BENCH
to use prometheus Wood clay powder, mix the required amount of powder with a teaspoon of water into a small dish, adding more water if needed. When the required consistency has been reached mould the clay into the desired shape then allow to dry for 24 hours, then cover with any metal clay and fire it. please note, remember to leave a small hole uncovered with metal clay to ensure the wood clay burns out before firing.
Clay-Bond Plus, 5g
With clay-Bond plus, you can create permanent connections between fired metal clay pieces without having to use solder and a torch.
• clay-Bond plus is a metal alloy powder which becomes a paste when mixed with water. this acts like an adhesive for metal findings • For best results apply with a stiff brush to the two metal pieces you want to bond • the paste will dry in minutes and will hold firmly during firing • Jar contains 5g of powder
