52 ULT Chest Freezer Offers Eco-Friendly, Compliant and Secure Cold Storage
The Thermo Scientifi c TDE Series -80°C Chest Freezer is the latest addition to Thermo Fisher Scientifi c’s ultra-low temperature (ULT) green portfolio. With increasing reliance on Thermo Scientifi c temperature-sensitive materials and therapeutics, laboratories require equally sensitive and highly consistent cold storage equipment. The freezer uses eco-friendly refrigerants and improved temperature regulation effi ciency to offer approximately 25% reduction in energy usage for most size and voltages over the previous design.
Building off Thermo Fisher’s 80 years of experience developing cold storage solutions, the Thermo Scientifi c TDE Series -80°C Chest freezers, powered by H-drive hydrocarbon systems, deliver the reliability and enhanced performance required for vital research without compromising sustainability goals. With rapid temperature recovery after the door opens and tight peak variation, the TDE Series Chest Freezer is designed for both frequent entry and long-term storage applications. The use of natural refrigerants and insulation with extremely low Global Warming Potential (GWP) and Ozone Depleting Potential (ODP) levels far exceeds current regulatory requirements and ensures laboratory compliance with U.S. EPA SNAP & EU F-gas regulations.
“The new TDE Series Chest Freezer enables us to meet both performance and sustainability goals for our customers. Its hydrocarbon refrigerants are best-in-class for reducing global warming impact, and rapid temperature recovery improves energy effi ciency within the lab,” said Chris Champlin, Vice President and General Manager of Laboratory Equipment, Thermo Fisher Scientifi c. “From our fi rst ULT freezer in 1940 to this newest freezer, we continue to deliver new cold storage solutions that meet the evolving needs of our customers.”
The new TDE Series Chest Freezers are part of a full line of ultra-low temperature freezers that provide a wide range of capacities and confi gurations, enabling users to maximise their cold storage workfl ows.
More information online:
ilmt.co/PL/30q0 58941pr@reply-direct.com
Microplate Optimised for Magnetic Bead Separations
Porvair Sciences has introduced a 96-well deep well microplate designed for labs using magnetic beads for nucleic acid purifi cation, clean up and protein purifi cations.
The 96-well magnetic bead separation plate has a reinforced base that can be routinely centrifuged at up to 6,000x g enabling faster magnetic bead separation protocols and improved sample quality.
Manufactured in a class 10,000 cleanroom facility from ultra-pure grade polypropylene, the magnetic bead separation plate contains the lowest possible level of leachable contaminants and is certifi ed as RNase/DNase free to minimise any impact on bioassays. Combining round well architecture with ‘U’ bottom and a large working volume (2.0 ml per well) this specialist deep well plate offers improved mixing, pelleting and washing of a wide range of magnetic beads. The cylindrical wells with round bottoms also ensure optimal recovery of sample.
Offering high chemical and temperature resistance (-196°C to +121°C) the design of these new plates also includes alphanumeric well coding for easy sample tracking and raised well rims to enable easy, high integrity sealing.
More information online:
ilmt.co/PL/oYMJ 58347pr@reply-direct.com
Analyse Surface Area and Pore Size Distribution of up to 4 Samples
Microtrac MRB’s BELSORP MINI X allows measuring specifi c surface area, pore size distribution and total pore volume. It shows outstanding features resulting into the world’s highest repeatability with signifi cantly reduced measurement time. The instrument features up to 4 sample measurement ports and new high-throughput functions including multi-device control.
Equipped with dedicated pressure sensors on each sample measuring port and a port for saturated vapour pressure, it enables completely independent simultaneous measurements.
The new measurement software improves user productivity by displaying the measurement progress, grasping the maintenance timing, and sending the analysis results via e-mail. Further, the new BELMASTER analysis software enables the structural evaluation of a wider range of materials than ever before, including catalysts, pharmaceuticals, pigments, ceramics, battery materials or polymers.
View the video:
ilmt.co/PL/agyr More information online:
ilmt.co/PL/PxGw
58440pr@reply-direct.com
Smart Top Loading Autoclaves
For laboratories looking for a relatively small autoclave but cannot accommodate a benchtop model and there is limited fl oor space, a vertical chamber steriliser is the ideal solutions. And where there are demanding loads that need sterilising, the only smart solution is a research grade laboratory autoclave developed from Priorclave.
Priorclave offers a range of vertical chamber (top loading) autoclave, with capacities ranging from 60 to 150 litres. Not only do they easily accommodate the tallest fl asks, fermentors, and bioreactors, they’re also excellent for waste processing, especially in large batches. Priorclave’s top loading autoclaves are among the most compact full-size units on the market today. Compared to similar-sized medical-grade rectangular-vessel units, cylindrical autoclaves are easier to operate, less expensive to maintain, and more reliable over a longer working life.
The smallest in the range, the V60 autoclave, is now available as a SMART option. They will become the preferred choice for industrial, research, and production labs and facilities since they offer more benefi ts and features as standard. The SMART range offers fully customisable cycles (with expanded memory), pre-cycle and post-cycle vacuum, integrated cooling and freesteaming, and air intake fi ltration as standard.
These top loading autoclaves are ideal for standard tasks such as media prep, waste loads, labware, they also produce drier loads and can more reliably handle complex loads that tend to trap air. Typically, they will be used for processing mixed waste, biological waste, pathogen-heavy materials, cloth and textile sterilisation, soil and substrate preparation, wrapped instruments, and porous loads.
Every top-loading autoclave incorporates Tactrol® 3, a programmable controller that brings a more simplistic approach to function settings. It gives more precise control and delivers information on
cycle process to achieve the ultimate in sterilisation performance. More information online:
ilmt.co/PL/9xZv and
ilmt.co/PL/qMQk
58442pr@reply-direct.com
Send your Press Releases to:
pr@intlabmate.com
INTERNATIONAL LABMATE - NOVEMBER 2022
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72
