June, 2013
www.us-tech.com
Board-to-Board Connector From FCI
Etters, PA — FCI has developed a hermaphroditic board-to-board con- nector that can be rotated to any angle between +90° and –60°. The RotaConnect™ rotatable board-to- board connector offers significant design flexibility as the same connec- tor is capable of providing perpendi- cular, co-planar, or angled intercon- nect solutions. The hermaphroditic board-to-
board connector, which mates to itself can also be placed anywhere on the PCB, further expanding design op - tions. The connector has a dual-beam spring contact design, delivering high- performance and reliability. Designed with a passive latch
for housing retention, the rotatable board-to-board connector’s housing protects the pins and prevents mis- mating. Available with optional side brackets for increased PCB retention and optional pegs for location, the connector supports multiple mating and un-mating directions with Y and
Southampton, PA — CW Industries has developed a line of fully enclosed, heavy-duty power slide switches that are rated at 16A @125VAC. The G/GS-2011 and G/GS-2012 Series power slide switches are dust-proof and available in both SPST and SPDT circuitries. These compact switches are easy to install into a panel opening of 0.550 x 1.125-in. (14 x 28.6mm) and are available in cus- tom colors. Optional toppers can be added to the switch to enhance the panel appearance and match its mat- ing surface. The new switches are manufac-
tured on fully automated equipment making them an excellent, cost-effec-
Z directional floating allowance. With a 3.00mm pitch, these high-
power board-to-board connectors are available in positions ranging from 2 up to 14 (increments of 2). Rota - Connect is rated up to 5A with an oper- ating voltage of 125VAC and a temper- ature range of –40 up to +125°C.
Page 81
Board-to-board connectors. The connector is suitable for
control boards, sensors, actuators, rigid LED strips, and automotive
electronics. Contact: FCI USA LLC, 825 Old
Trail Rd., Etters, PA 17319 % 717-938-7200 Web:
www.fci.com or
www.fciconnect.com
Power Slide Switches from CW
tive alternative to more costly dust- proof switches with rubber boots. These switches can be modified to suit specific actuation forces, actua- tor height requirements and styles. The operating temperature rating range is –25 to +105°C, and they are rated at 100,000 cycles no load mini- mum. Used in many consumer and industrial applications such as power tools, vacuums and appliances, both series of switches are RoHS-compli-
ant and UL, CSA and VDE listed. Contact: CW Industries, 130
James Way, Southampton PA, 18966 % 215-355-7080 E-mail:
jschott@cwind.com Web:
www.cwind.com
Economical Adjustable Workbenches from IAC
Brea, CA — IAC Industries is intro- ducing new economical versions of the company’s height-adjustable workbenches: the 930 Pro Series and 940 Pro Series. These workbenches are best identified by a cantilever leg design and an adjustable height worksurface. The versatility of easy worksurface height adjustment has popularized this type of workbench
back. With the 930/940 Pro Series, there is more; both new series incor- porate a cantilever support system, housing the hydraulic lifters, that provides maximum leg and knee room by eliminating the front legs found on conventional benches. A rotating hand crank manually
controls height adjustment on the 930 Pro Series. The crank handle folds out of the way when not in use. Adjust - ment on the 940 Pro Series is electri- cally actuated with Up/Down push- buttons. Either controller may be positioned on the right or left side, under the worksurface support frame. A steel channel framed worksur-
Adjustable height workbenches.
in a variety of environments such as manufacturing, assembly, and labo- ratories as companies must do more with fewer workstations. The new 930 and 940 Pro Series accomplish this with a new cost-effective design. The ability to precisely position
the worksurface reduces strain and fatigue in shoulders, arms and the
face provide for a full 500-pound even- ly-distributed load capacity. The worksurface in both models travels 12-in. (304mm) to provide heights ranging from 30 to 42-in. (0.76 to 1.06m). The worksurface is available in Standard or ESD laminate, with a wide variety of color choice. Nu - merous options are available for sus- pended drawers/cabinets, electrical channels, and upper utility struc-
tures with shelving and lighting. Contact: IAC Industries, Inc., 895
Beacon Street, Brea, CA 92821-2926 % 800-989-1422 or 714-990-8997
E-mail:
benchsales@iacindustries.com Web:
www.iacindustries.com.
See at Atlantic Design and Mfg. Booth 4718
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92