This page contains a Flash digital edition of a book.
Page 66


www.us-tech.com


Henkel Intros Loctite Silicon-Based Electrically Conductive Adhesives


Irvine, CA — Henkel has developed a new portfolio of silicone-based elec- trically conductive adhesives (ECAs) with special properties to address harsh environmental conditions. The Loctite Ablestik ICP 4000 series of ECAs withstand operating tempera- tures as high as 200°C and deliver the flexibility required to cope with significant vibration. Traditionally, older-generation


epoxy-based ECAs have been utilized for certain automotive sensor appli- cations. As technology has pro- gressed, however, and sensor prox- imity to the heat and vibration source — the engine block — has become closer, epoxy systems are challenged to maintain long-term flexibility and conductivity. The Loctite Ablestik ICP 4000 materials overcome these challenges. Typical temperature, humidity, shock and storage testing evaluates ECA per- formance for a period of 1,000 to 1,500 cycles/hours. When validating the properties of the Loctite Ablestik ICP 4000 series materials, however, testing time periods were doubled. The new silicone-based ECAs showed good performance even after 3,000 hours of 85°C/85 percent RH temper- ature and humidity testing, 3,000 cycles of thermal shock analysis from


–40 up to 175°C, and 3,000 hours of heat storage at 175°C. These results clearly illustrate the materials’ capa- bility not only during cycling, but throughout long-term operation in the field as well. The new materials have been


formulated to provide a range of capability that focus on electrical


filled, heat-curable, silicone-based electrically conductive adhesives. The new silicone ECAs deliver improved flexibility over traditional epoxy-based materials, allowing for compensation of common CTE mis- matches and, therefore, the ability to survive extreme vibration over extended periods of time. The new


June, 2013


Agilent Intros Oscilloscope


Options Santa Clara, CA — Agilent Technologies Inc. has introduced enhancements to its InfiniiVision 2000 X-Series oscilloscopes that pro- vide more performance at a lower cost, making them suitable for edu- cational institutions, manufacturing test environments and R&D benches. The new capabilities for the


InfiniiVision 2000 X-Series bring more memory, and a variety of low- cost serial decoding options for com- puter and embedded systems design- ers, as well as automotive and aero- space manufacturers. The Agilent InfiniiVision 2000


X-Series offers bandwidths from 70MHz to 200MHz and has the fastest waveform update rate in its class for superior viewing of signal detail and infrequent events. These oscilloscopes enable engi-


New cars rely on new adhesives.


resistance, adhesion, thermal con- ductivity and flexibility while deliv- ering high temperature and high vibration compatibility. The materi- als are single-component, silver-


materials also exhibit very low out- gassing and bleed during cure, which


adds to their high reliability. Contact: Henkel Corp., 1400


Jamboree Rd., Irvine, CA 92606 % 714-368-8000 fax: 714-368-2265


Web: www.henkel.com/electronics or www.henkelna.com


See at Atlantic Design and Mfg. Booth #3225.


neers and technicians to see more of their signal more of the time; the instruments reportedly provide the fastest update rates in their class and an 8.5-in. WVGA display, which supplies twice the viewing area of other popular ‘scopes. They offer optional integrated MSO capability for time-aligned digital and analog


signal viewing. Contact: Agilent Technologies,


Test and Measurement Organization, 5301 Stevens Creek Blvd., MS 54LAK, Santa Clara, CA 95052 % 800-452-4844 Web: www.agilent.com


drive in To Be Precise. Innovators in Wire Processing MegaStrip 9650


High performance automatic cut and strip machine featuring intuitive program- ming and a wide range of processing options that make it a wise investment.


Measures, cuts and strips up to 600 MCM and jacketed cables up to 1.38” in diameter


  Programmable rotary cutting unit for precise shield cutting Automatic locking guide system


Schleuniger, Inc. | Manchester, NH | (603) 668-8117 | www.schleuniger-na.com/ms9650_us


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92