Page 40
www.us-tech.com
The Best Performance in Convertibility... WEST·BOND’s 7300E Pick & Place Systems
June, 2013
Kulicke and Soffa Extends Wedge Bond Power Series
Singapore — Kulicke and Soffa Indus- tries, Inc. has added to its highly suc- cessful KandS Power Series™ equip- ment. The Company’s new high per- formance Orthodyne wedge bonder, PowerFusionPS, is driven by a new powerful direct-drive motion system and expanded pattern recognition ca- pabilities which deliver exceptional productivity and performance. The PowerFusionPS fits well
into the company’s Power Series of products, known for setting new standards for productivity, perform- ance, advanced package capability, ease of use, configuration flexibility and reliability. PowerFusionPS provides in-
• Encoder Controlled Rotating Pick-up Tool • Orthogonal X, Y, and Z Axes • Microprocessor Controlled •
Throatless Chassis
• ESD Compatibility • Epoxy Dispense or Eutectic Die Attach • Tweezer Die Pickup • Ultrasonic Beam Lead Diode Attach
www.westbond.com 1551 S. Harris Court Anaheim, CA 92806 Tel 714·978·1551
MD&M 2013, Anaheim Convention Center Booth # 853 in Hall E, Febdruary 12- 14, 2013
Manufactured in the U.S.A. since 1966
creased UPH enabled by the direct- drive servo system and faster pattern recognition find times. It also shows higher MTBA due to the improved pattern recognition. The advanced package capabilities improves the
processing of high-density power packages, due to an expanded bond- able area, wider leadframe capability and superior indexing accuracy and teach mode. The system is available in two
different models with single or multi- ple head configurations. The TL Model is the correct choice for bonding single-row to four-row matrix TO- power discrete packages. The en- hanced HL model is intended for ad- vanced power package designs. When bonding high density power devices, like SO-8 and PDFN, or stretching the wire limits on a matrix D-Pak, the su- perior indexing accuracy and clamp- ing capabilities of the HL Model deliv-
er consistent performance. Contact: Kulicke & Soffa Indus- tries Inc., 1005 Virginia Drive, Fort
Washington, PA 19034 % 215-784-6000 fax: 215-784-6001 Web:
www.kns.com
Mill-Max Adds Long Stroke Connectors
Oyster Bay, NY — Mill-Max has added a second version to its 829 se- ries single-row, right-angle, spring- loaded connectors. The new connector, 829-22-0XX-20-002101, has an in- creased mid-stroke distance of 0.045- in. /0.090-in. full stroke distance (1.1mm/2.28mm) close to double most standard series products, providing more flexibility and tolerance. Both versions of the 829 series
White Residues Getting You
Down? Eco-dFluxer SMT100 Will Dig You Out! u Ou
• Inline & batch defluxer • Effective on OA, RA, RMA & No-Clean fluxes • Cleans at lower concentration & temperatures
• Long bath life • Non-flammable • Low VOC & zero GWP
Contact Techspray at 800-858-4043 x543 or
tsales@techspray.com for your FREE TechLab analysis.
PRECISION | SAFETY | PERFORMANCE ut!
Manufacturing Specialists of Electrical Wire and Cable
Offering a broad range of products:
› Instrumentation & Control › Thermocouple › Electronic › High Temperature › Mil Spec › Flexible Cord
Contact Us To Learn More
provide an excellent solution for appli- cations calling for a spring-loaded con- nection that lies parallel to the PC board. These low profile, right angle connectors are suitable for the small packaging requirements of hand-held devices, especially where vertical space is limited. With tails bent at right-angles
and locating pegs on the insulator, the 829 series connectors are installed as through-hole components providing a secure connection to the PC board. These SLCs are suitable for hand, in-
trusive reflow or wave soldering. Gold-plated brass components
and beryllium copper springs ensure the highest conductivity, corrosion resistance and durability. The 829 series connectors have spring-loaded
Long-stroke spring-loaded connectors.
pins rated at 2 amps continuous (3 amps maximum), use high tempera- ture Nylon 46 insulators, and are of-
fered in up to 20 positions in a strip. Contact: Mill-Max Mfg. Corp.,
PO Box 300 Oyster Bay, NY 11771- 0300 % 516-922-6000 Web:
www.mill-max.com
Specializing in Custom Cable Constructions
www.eco-dfluxer.com | 800-858-4043 x543
Low Minimums | Fast Turnaround
www.multicable.com
860-589-9035
info@multicable.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92