Page 76
www.us-tech.com
June, 2013
Tripp Lite Intros Rack-Mounted Network Ready UPS Systems
Chicago, IL — Tripp Lite has expanded its series of line-interactive UPS Systems to include six SmartPro® models with pre-installed SNMPWEB- CARD network cards. These new UPS Systems arrive at a facility network-ready and can be deployed quickly, saving IT personnel valuable time. The new line is comprised of six models rang-
ing from 1500 to 3000VA (1350 to 2880 watts). The UPS systems provide secure SNMPv3/
HTTPS/SSH management with RADIUS and IPv4/IPv6 support. An interactive LCD shows power and protection status and automatic voltage regulation (AVR) corrects brownouts and overvolt- ages without draining battery power. The units
have individually controllable outlets to allow for remote reboot of some or all equipment and load shedding when an outage occurs. The systems reportedly provide up to 98 percent efficiency rat- ing, which reduces power consumption, and total cost of ownership. Included PowerAlert software enables efficient configuration and management of hundreds of UPS systems According to the company, the new models
UPS system can be rack-mounted.
Ersa HR 600 - REWORK newly defined! Flexible, efficient, automated & reliable
are an aid to busy IT professionals performing UPS deployment. The pre-installed SNMPWEB- CARD saves setup time and ensures safe, simul- taneous arrival of a valuable communications accessory along with their UPS system. Contact: Tripp Lite, 1111 W. 35th Street Chicago, IL 60609 % 773-869-1111 fax: 773-869- 1329 E-mail:
info@tripplite.com Web:
www.tripplite.com
Lista Offering Variety of Workspace Solutions
Holliston, MA — Lista International Corporation’s efficient and modular workstations are now available for electronic assembly. Ergonomically designed, these workstations offer un - limited flexibility to accommodate the changing workplace. Arlink 8000 and Align Adjustable Height Workstations offer an unparalleled level of function- ality and customization. The Arlink 8000 Modular
Workstation is easily configured and reconfigured, making it suitable for multiple functions and changes in
The combination of a proven technology with innovative image processing sets new standards!
The task formulated for the Ersa HR 600 Hybrid Rework System was to of- fer professional, automated rework of sub-assemblies for the electronic industry. With the system now at hand, almost all high pin-out compo- nents that may be found on modern board assemblies, and of virtually any shape, can be reliably reworked.
The core competencies of this uni- versal rework system are the place- ment of components, their lifting off and their controlled setting down, as well as the soldering process.
Special attention was given to the automation of the individual process steps. All operations can be con- trolled in a step-by-step mode by the operator himself, or they can be com- bined into an automated operation, re
e
Technical Highlights
Automated component placement Reliable, automated desoldering and soldering process
Hybrid heater head with two heating zones for effective heat transfer
Extensive, powerful IR-bottom side heating cassette with 3 zones
Non-contact temperature measurement with digital sensor
requiring very few interventions by the operator.
Two K-type thermocouple inputs Accu-TC sensor
Effective assembly cooling with compressed air
Ersa HR 600 High-End-Hybrid-Rework
Highly versatile workstation.
workflow. This convenient adaptabil- ity provides a cost-effective solution for all assembly needs. When com- bined with a broad selection of above-worksurface accessories, the Arlink 8000 allows workers to maxi- mize efficiency and productivity. The Align Adjustable Height
Workstation provides an adjustable base height range from 27 to 42-in. (686 x 1067mm) that provides quick and easy alignment for new tasks or to accommodate different workers. This helps reduce fatigue, stress and injury potential, and is suitable for repair, test and assembly processes. Align workstations are available with both electric and hand-crank
height adjustability. Contact: Lista International
Ersa North America, Inc. | Plymouth, WI 53073 |
info-ena@kurtzersa.com Ersa GmbH (headquarters) | 97877 Wertheim |
info@ersa.de |
www.ersa.com
Corp., 106 Lowland St., Holliston, MA 01746 % 800-722-3020 fax: 508- 626-0353 E-mail:
sales@listaintl.com Web:
www.listaintl.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92