TOOLS
Giving customers a boost
Diager specialises in the manufacture of masonry drill bits, with constant investment in production tools aiding high quality and high performance products.
D
iager’s booster, a SDS+ 3 cutting edges drill, has been used by craftsmen and professional building groups for over 10 years. The booster drill bit is able to drill through hard concrete
and concrete with rebar. Its carbide tip with 120° angle between each edge acts as an antilock geometry. This geometry will make a concentric hole, which is important as the quality of the hole has to be considered for doing safe anchoring.
SDS hammer drill bits with PGM certification mark 8.Q10
are suitable for the safe installation of anchor fixings in concrete and masonry. Their tolerances are tailored to metal anchors, bonded anchors and plastic anchors with European Technical Approval (ETA). Diager states that using drill bits without a PGM mark can influence the safety and reliability of anchor fixings.
www.diager.com
Milwaukee launches M12™
FUEL drills
Milwaukee Tool has introduced the M12™ FUEL Driver (2402-20/22), M12™ FUEL ½ inch Drill/Driver (2403-20/22) and the M12™ FUEL ½ inch Hammer Drill/Driver (2404-20/22) to its range of cordless power tools.
½ inch chuck. Milwaukee has combined its POWERSTATE™ brushless motor, REDLITHIUM™ battery pack, and REDLINK PLUS™ intelligence to deliver 12V drills that, it says, will out run many compact 18V tools. The new POWERSTATE™ motor is designed, engineered and built by Milwaukee Tool, providing up to 350 in-lbs of torque and up to 1,700rpm. The motor also reduces noise and cools more rapidly. REDLINK PLUS™ Intelligence delivers what Milwaukee calls “high- efficiency commutation for a longer run time.” REDLINK PLUS™ Intelligence integrates full-circle communication between tool, battery and charger, and constantly monitors this internal network to maintain ideal conditions.
M FOR A SAFE ANCHORING, RELY ON YOUR DRILLING!
The famous SDS+ 3 cutting edges drill Booster is used by craftsmen and professionnal building group since over 10 years. The Booster drill bits is able to drill through hard concrete and concrete with rebbar. Never forget the quality of the hole is part of a safe anchoring.
ilwaukee states that its three new cordless drills deliver up to ten times longer life, two times more power and four times more run-time for the professional tradesman. The drill/driver and hammer drill/driver also offer a
contact@diager.com
visit us in Hall 8 Stand Q10
made in E.U.
Drill bits manufacturer
www.diager.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176 |
Page 177 |
Page 178 |
Page 179 |
Page 180