July, 2011
www.us-tech.com
Page 67 FlexLink Launches New Gen Conveyors
Goteborg, Sweden — FlexLink has launched its new generation of stain- less steel conveyors, following the success with the X85 conveyors start- ed in 2008. The new conveyor prod- uct is expected to met increased demands for production efficiency, flexibility and cleaning.
80m/min. The company has designed a robust stainless steel conveyor with a low noise level, considerably lower than industry standards. The new stainless conveyor
design is fully modular, from the individual component up to the com- plete conveyor. This enables easy
IP65 class with food-grade oil. Design efforts have been made to
make the stainless conveyors easy to clean —both the exterior and the inte- rior are designed so that pockets for dirt or water remaining after cleaning are minimized. The cast stainless steel spacers have good cleaning and drainage properties, and add to the robustness of the design as well. The stainless steel conveyors are a major contribution toward more effi-
cient production lines in filling and packaging lines for consumer goods. By producing a modular conveyor sys- tem that is easy to clean enhances the flexibility of installed lines. Contact: FlexLink Systems,
Inc., 6580 Snowdrift Road #200, Allentown, PA 18106 % 877-266-2249 or 610-973-8200 Web:
www.flexlink.com
See at Intersolar Booth #9311
Bentek Solar Intros Circuit Breakers and Re-Combiners
Modular stainless steel conveyor. The platform of conveyors in
stainless steel is available in three widths, 85, 180 and 300mm which are suited for handling products in pro- duction and packaging lines within the Fast Moving Consumer Goods (FMCG) and healthcare industry seg- ments. Following the previously released new generation X85 convey- ors in aluminum, the designations for the new stainless steel conveyors are X85X, X180X and X300X. The capaci- ty requirements for stainless convey- ors are high: the 85mm wide version has an upper speed level of 120m/min and the wider versions can run up to
and accurate assembly and easy modification of the conveyor configu- ration when there is a need to change the line layout. The new generation stainless conveyors are available in three versions: Wash down, which is the standard and easy to clean; Wipe off, the version with covered sides and no slots; and Covered return chain, which is suited for applica- tions when the cleanliness require- ments are extra high. New robust conveyor supports
and guide rail systems are being launched together with the conveyor platform. Standard drive units are
San Jose, CA — Bentek Solar is introducing its new product line including the company’s new Circuit Breaker Re-Combiners, Circuit Breaker Bi-Polar Re-Combiners, and Circuit Breaker Wall and Roof-top Mount Re-Combiners. The Solar Circuit Breaker Re-Combiners re - portedly provide maximum perform- ance and safety with UL489 break- ers. The breaker itself serves as a disconnect, in addition to providing circuit protection. In addition, the re- combiners are designed to provide the final interface to the inverter with a flexible design for customiza- tion and ease of installation. The company’s Multiple Dis -
connect Safety Systems (MDSS) are designed for large PV solar systems (250kW or greater), and are intended for installation next to the inverter. The new MDSS for 600VDC and 1000VDC solar systems provide cus-
tomers with multiple UL 600VDC and 1000VDC load-break disconnects respectively, combined into one easy- to-install, safe compact enclosure. The Bentek Circuit Breaker
Safety Systems (CBSS) are designed for large PV solar systems (250KW or greater), and are intended for instal- lation next to the inverter. The new CBSS for 600VDC and 1000VDC solar systems provide customers with multiple UL 600VDC and 1000VDC load-break circuit breakers respectively, combined into one easy- to-install, safe compact enclosure. This provides circuit protection and individual disconnects, eliminating fuses and complying with NEC dis- connect requirements. Contact: Bentek Corp., 2350
Harris Way, San Jose, CA 95131 % 866-505-0303 or 408-954-9600 E-mail:
JohnB@bentek.com Web:
www.BentekSolar.com
See at Semicon West Booth #7564. 60VA LED UV Curing System: UJ30/35
Small, Low Power & Environmentally Friendly, with High Intensity Output Over 10,000 mW/cm2
Panasonic ideas for life
http://pewa.panasonic.com
1-800-228-2350 4:08:38 PM
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88