Page 70
Keystone: UL-Recognized, Quick-Fit Terminals
New Hyde Park, NY — Keystone Electronics is now offering UL-recog- nized, male and female, PCB quick- fit terminals and male rivet mount quick-fit terminals designed to hold up under repeated mating cycles.
The PCB mountable ter-
minals have a special Sturdi- Mount design that provides increased PCB mounting sta- bility and strength by main- taining the terminal’s perpen- dicularity to PCBs during and permanently after wave sol- dering. The rivet mount styles
permit design and mounting flexibility for boards, panels and chassis mating environ- ments. These quick-fit termi- nals meet NEMA 2-1982-1988 and UL 310 specifications. The terminals are made of brass
and supplied with a tin plate. PCB mount versions are available in 0.11, 0.19, 0.21, and 0.25 in. (2.8, 4.8, 5.2, and 6.4 mm) tab sizes. Rivet mount versions are avail-
able in 0.11, 0.19 and 0.25 in. (2.8, 4.8 and 6.4 mm) tab sizes. All Keystone quick-fits are available in bulk from stock through Keystone’s
Quick-fit PCB terminals.
ware and provides a full complement of stamping, machining and assem- bly services. An in-house, application engineering group is on hand to aid customers requiring product modifi-
cations or special designs. Contact: Keystone Electronics Corp., 55 S. Denton Avenue, New
11:36 AM Page 1
Hyde Park, NY 11040 % 800-221-5510 fax: 516-328-1080 E-mail:
kec@keyelco.com Web:
www.keyelco.com
New Products TDK-Lambda Certifies
www.us-tech.com
global distribution network. Online ordering is accommodated. Keystone is a manufacturer of electronics components and hard-
Medical Power Supplies
National City, CA —TDK Corporation has introduced its TDK-Lambda DTM65-D medical external power supplies, designed to meet DoE Level VI and EU Tier 2 v5 efficiency stan- dards. The DTM65-D is certified to the medical IEC 60601-1 standard, mak- ing it suitable for a variety of hospital, dental and health care applica- tions, including diagnostic and monitoring equipment. The new convection-cooled
DTM65-D is housed in a rugged, vent-free enclosure, measuring 5.2 x 2.7 x 1.6 in. (13.2 x 6.9 x 4 cm). AC is applied through a standard IEC 60320-C14, three- prong socket and the output DC cable is fitted with a four-pin power DIN connector as stan- dard, with other connector types available upon request. The adapters also include over-volt- age and over-current protection. Accepting a 90 to 264
VAC input, the 40 to 65W adapters are available with 5, 12, 15, 19, 24, 28, 36, and 48V outputs and can operate in ambient temperatures ranging from –4 to +140°F (–20 to +60°C), derating lin- early to 50 percent load from 104 to 140°F (40 to 60°C). With an average efficiency of greater than 89 percent (greater than 87.3 percent for the 5V model), the power supplies have an off-load power consumption of less than 0.15W. The DTM65-D series has been
certified to ANSI/AAMI ES 60601-1, CAN/CSA-C22.2 No. 60601-1-08,
DTM65-D medical external power supply.
(2 x MoPP), output to ground 1,500 VAC (1 x MoPP), with a touch cur- rent of less than 100 µA and a leak- age current of less than 300 µA. All models are suitable for BF rated equipment and can be operated up to
an altitude of 16,404.2 ft (5,000m). Contact: TDK-Lambda
Americas, Inc., 401 Mile of Cars Way, Suite 325, National City, CA 91950 % 619-575-4400 E-mail:
tom.tillman@us.tdk-lambda.com Web:
www.us.tdk-lambda.com
FRAMOS Offers Sony
MODEL 802 TABLE TOP HOT/COLD TEST HANDLER
Optional-55°C to +155°C minimum working range.
Handles all device types, 1.6mm x 1.6mm – 60mm x 60mm.
Near zero changeover kits.
Base price under 30K$
Low-Power CMOS Imager
Ottawa, Ontario, Canada — FRAMOS® is now offering Sony’s IMX397, a small, low-power global shutter CMOS imager for high-speed monitoring and sensing in embedded industrial applications. The IMX397 has a pixel
pitch of 3.45 µm and VGA res- olution. It is a quiet, low- power imager with a small footprint and a high-speed throughput of 240 FPS at full resolution. These qualities, together with MIPI output and a compact package, make the embedded imager a good candidate for factory automa- tion, industrial applications and sensing. The monochrome-only
www.exatron.com 1-800-EXA-TRON 1-408-629-7600
small image sensor is 0.2 x 0.15 in. (4.6 x 3.7 mm) in a thin package. The MIPI CSI-2 I/F can connect to general-pur- pose ISP, making the Sony IMX397 suitable for embedded vision projects in an industrial environment. Both internal and external trig-
gers can be set for precise timing and capture control in automated indus-
Sony IMX397 CMOS imager. Contact: FRAMOS Technology,
Inc., 2733 Lancaster Road, Suite 210, Ottawa, Ontario, Canada K1B 0A9 % 613-208-1082 E-mail:
info@framos.com Web:
www.framos.com
trial processes. The IMX397 has a 10-bit A/D converter and operates with three power supply voltages, achieving low power consumption of about 105 mW for battery operation.
IEC/EN 60601-1, and carries the CE mark for the low-voltage, EMC and RoHS2 directives. All models meet IEC60601-1-2 Ed4:2014, EN55011 Class B, FCC Part 18 Class B emis- sions and immunity standards. Input to ground isolation is 1,500 VAC (1 x MoPP), input to output is 4,000 VAC
August, 2018
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
