ADVERTORIAL


Minimise Risk. Maximise Compounding Accuracy


NuAire’s PharmaGard NU-797 Compounding Aseptic & Containment Isolators are engineered to maximize work production by providing a comfortable and ergonomically correct environment.


PharmaGard Compounding Aseptic (CAI) and Containment (CACI) Isolators are designed to provide a sterile work environment for the compounding of hazardous and non-hazardous drugs.


PharmaGard creates true HEPA filtered laminar airflow at 20 air changes per minute within both the work zone and interchange areas to assure ISO Class 5 conditions. Utilising laminar flows continuous stream of HEPA filtered air across the work zone and interchange areas assures sterility and minimises cross contamination.


The PharmaGard PR creates a positive pressure clean air [ISO Class 5] controlled environment specifically for aseptic compounding of non-hazardous drugs, both the NR negative pressure and NTE negative total exhaust create a negative pressure clean air [ISO Class 5] controlled environment for the aseptic compounding of hazardous drugs.


Circle no. 243


NuAire knows that the design of a CO2 incubator is critical to cell culture growth. A properly designed


CO2 incubator must feature precise CO2, temperature and relative humidity control to


experience [ constant contamination control ]


promote cell culture growth as well as control mechanisms to prevent contamination within the growth chamber.


The AutoFlow Incubator utilises a digital, solid-state


programmable microprocessor infrared [IR] CO2 sensor which makes the necessary corrections to the chamber environment, supporting quicker recovery times. The interior chamber walls are lined with high tech R5 insulation for temperature stability and energy efficiency.


Utilizing a 99.99% HEPA filtration system, a Class 100 air quality is achieved inside the work chamber; maintaining at a positive pressure similar to an ISO Class 5 Cleanroom, creating the Constant Contamination Control (C3) system for a dependable environment. Through design and proper incubator technology, we can help your research grow.


Circle no. 244 Direct Heat & Water Jacket CO2 Incubators


Closed Loop HEPA Filtration Creates an ISO Class 5 cleanroom inside the growth chamber. Air and gas pass through 99.99% HEPA fi lters to create Class 100 air. Filters are kept out of the growth chamber ensuring a contaminate free work zone. The chamber is maintained at positive pressure to prevent potential contaminates from entering the growth chamber.


Sensitivity and Accuracy of Gas Control A microprocessor-based, non-dispersive, digital solid-state infrared [IR] CO2


requiring less calibrations.


Precision of Elecronic Microprocessor Controls Run by a programmable micro-controller, AutoFlow™


samples


input sensors, sets control outputs, and makes necessary corrections to the chamber environment.


Dual Sterilization Cycles - Self Cleaning System The chamber heats up to 95°C Humidifi ed or 145°C Dry for a constant uniform high temperature on chamber walls, brackets, shelves, and water pan.


Experience Rust Free Environment


Experience Constant Contamination Control (C3


)


sensor provides a stable drift-free output


NuAire has a complete line of polypropylene products for the laboratory; Vertical Laminar Flow Fume Hoods, Conventional and By-Pass Fume Hoods, 100% Polypropylene Casework, Acid Storage Cabinets, Countertops, Drying Racks, and Accessories.


NuAire FumeGard Vertical Laminar Flow / Wet Process / Fume Hoods can be used where product and personnel protection are required. Areas of use include chemical research, microelectronics, high acid / trace metal analysis use, semi-conductor design / development and/or production assembly processes. Designed and tested to meet the performance criteria as established by the National Sanitation Foundation Standard #49, Federal Standard 209d.


.5 0 1.0 1.5 2.0 Controlled Environments for Optimum Cell Growth


2100 Fernbrook Lane | Plymouth, MN 55447 | U.S.A. 763.553.1270 | WWW.NUAIRE.COM


warranty


years parts


4 Find, Follow, Enjoy:


The Polypropylene By-Pass Fume Hoods are ideal when only personnel protection is required. All NuAire Fume Hoods are certified to SEFA 1-1992 performance and meet ASHRAE Standard 110-1995 requirements.


In an effort to help keep your Laboratory looking crisp and clean, NuAire has designed a Plumbing / Utility Chase to cover plumbing pipes that may be exposed in your lab.


Circle no. 245 Circle no. 246


INTERNATIONAL LABMATE - AUGUST/SEPTEMBER 2011 - ADVERTORIAL


WWW.LABMATE-ONLINE.COM READ ALL THE LATEST NEWS ACCESS ARCHIVED ARTICLES FOLLOW LABMATE ON TWITTER


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68