This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Valves, Actuators and Accessories • Gate Valves ITT
Transmitter Isolation Valve
C132 Fabri-Valve® DESCRIPTION The Fabri-Valve C132 transmitter isolation valve is designed specifically to isolate an instrument transmitter from a tank. This allows transmitter replacement or maintenance of the transmitter without disrupting the process or draining the vessel. A special tank side flange permits blind boltup from the tank exterior. This is accomplished by moving the upper flange holes outboard. They remain on the ANSI 125/150 bolt circle but are now located closer to the horizontal centerline. Fabri-Valve transmitter isolation valves are designed to fit installations where the upper tank flange bolts are located 25° to 27° above the horizontal centerline. The transmitter side flange bolting is a standard ANSI 125/150 configuration. The Fabri-Valve transmitter isolation valve is available in two configurations; the C132R features the Fabri-Valve solid cast stainless steel body with heavy duty cast ductile iron yoke and packing follower. The C132S features a solid cast stainless steel body with heavy duty cast stainless steel yoke, and packing follower, and all stainless steel bolting. Standard body materials are 316 and 317L stainless steel. Special materials such as 254 SMO®
are also available.
SPECIFICATIONS Size Range
Pressure Rating
Temperature Rating Flanges Drilling
3” 150 psi (10.3 bar) CWP (cold working pressure)
450°F (232°C) with standard packing. Consult Rawson for higher temperatures. Outlet ANSI 125/150 drilling, Inlet special
A
Materials of Construction Model C132R
Body and Chest Seat Gate Yoke
Yoke Bolting Packing
Packing Follower Stem Nut
Lubrication Fitting Ratchet Operator
Operator Retaining Nut
Cast stainless steel type 316 or 317L Integrally cast (optional “O” ring)
Stainless steel of same grade used in body, finished to 63 RMS Ductile iron Plated steel Acrylic/PTFE
Ductile iron w/plated steel bolting Acid resistant bronze Plated steel
Cast iron/carbon steel Malleable iron
Model C132S
Cast stainless steel type 316 or 317L Integrally cast (optional “O” ring)
Stainless steel of same grade used in body, finished to63 RMS Cast 304 stainless steel Stainless steel Acrylic/PTFE