This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Bulk Instrumentation and Accessories • Tube Fabricating Equipment
Tools Manual Coning and Threading Tools C
DESCRIPTION Parker Autoclave Engineers manufactures a manual coning tool for optimum coning performance with tubing sizes up to 1/16” (14.3 mm) O.D. This is a precision quality manual tool to permit on-site end preparation for AE medium and high pressure tubing installations. Interchangeable collets for each size tubing provide proper centering of tubing. The cutting feed arrangement permits the operator to control the depth of cut to assure against work hardening effects. Interchangeable tool steel cutting blades are used in pairs to assure more accurate and faster coning and are designed to square-off and finish the tube as the cone is completed. There is a provision for applying metal cutting lubricants to the cutting zone.
The threading die holder is designed to hold the appropriate die for any of the standard Parker Autoclave Engineers tubing sizes through 1/16” (14.3 mm) O.D. Interchangeable guide bushings properly guide the tool for accurate thread cutting.
Micrometer Adjustable Torque Wrench
DESCRIPTION Parker Autoclave Engineer’s has available an adjustable torque wrench with a number of wrench adapters for accurate tightening of packing glands and tube nuts. Included are tables showing torque requirements for all valves and components. The wrench can be adjusted to the ranges shown and is used with interchangeable wrench adapters for hex sizes from ½” through 1-7/8”. Item numbers for wrench adapters are listed on chart.
Item
P-1680 91020
Description
Torque Wrench - Range 20 to 150 ft. lbs. (27 to 203 Nm) Torque Wrench - Range: 75 to 250 ft. lbs. (102 to 339 Nm)