This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
The integral filter/regulator (‘piggyback’) is a two station component designed to filter and regulate compressed air when cost and space are of primary concern. As wet, dirty air enters, it immediately flows through the air deflector, causing the air to move in a swirling motion. After condensed water is centrifugally removed, air passes through the filter and into the regulator. The high pressure of the air is systematically reduced via the adjustment spring and valve and exits the housing as clean and dry air that is ready to work at the specified pressure.
FEATURES
• 316 stainless steel body construction • All seals made of Fluorocarbon (FKM) • 0-125 PSI standard • Meets NACE specifications • Bonnet and Knob Acetal • Internal plastic parts • Acetal and ABS • Element Polyethylene • Internal Metal Parts • Valve Stainless Steel • Springs - Stainless Steel • Max. Pressure: 300 PSIG (20 bar) • Temperature Range: 40º to 180º F (4º to 82º C)
Table 1 X
Table 1 P
Table 2 72
Table 3 A B
Table 4 G N P
Model
Filter/regulator Series
1.5 oz. Bowl Element
40 Micron 5 Micron Options Gauge
Non-relieving Panel Nut (Plastic)
Table 2 XX
HOW TO ORDER Table 3 X
Table 5 02
Table 6 –
G
Table 4 X
Table 5 XX
Port Size 1/4
Threads NPTF
G Tap (BSPP) Note: All BSPP (G Tap) models use BSPT gauge threads.