This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Pressure and Temperature Measurement • Pressure Transmitters
Fixed Range Pressure Transmitter
Model 831 Standard DESCRIPTION
The Model 831 Standard transmitters is a durable, accurate and cost-effective fixed range pressure transmitter. An all 316 stainless steel transmitter, designed for years of stable performance in even the toughest environmental and corrosive media conditions. With its all-welded construction, this transmitter is weatherproof and capable of a direct spray with forces up to 200 psi without internal leakage. The standard Model 831 features a 4 to 20 mA output standard with a 12 to 30 VDC power supply.
FEATURES • All welded 316L stainless steel construction and wetted parts • ¾ inch NPT female conduit connection cable • 24 inch cable length standard • CSA approved, explosion proof, and meet NACE standards for off-shore applications
• FM approved with the explosion proof rating • Inline connection for slim profile • Rugged construction • Available with conduit adapter • Optional EMI protection
Table 1 XXX
Table 1 831
Table 2 F
H T
Table 3 A C G V
Table 4 0006 0015 0030 0100 0300 1000 3000 5000
Table 5 B
Model
831 Pressure transmitter Process connection ¼ inch NPT male ½ inch NPT male ½ inch NPT female Pressure types Absolute
Compound Gauge
Vacuum Pressure ranges
0 to 6 psi (0 to 0.41 bar) 0 to 15 psi (0 to 1 bar) 0 to 30 psi (0 to 2.1 bar) 0 to 100 psi (0 to 6.9 bar) 0 to 300 psi (0 to 20.7 bar) 0 to 1000 psi (0 to 69.0 bar) 0 to 3000 psi (0 to 206.9 bar) 0 to 5000 psi (0 to 344.8 bar) Input/Output
12 to 30 VDC/4 to 20 mA
Table 2 X
Table 3 X
Table 4 XXXX
HOW TO ORDER Table 5
X
Table 6 H L
Table 7 M
S
Table 8 A B C D
E-Z
Table 9 A B C D E F
G-Z
Table 6 X
Table 7 X
Table 8 XX
Isolation diaphragm material
316L process connection, Hastelloy C276 diaphragm 316L process connection and diaphragm (standard) Fill fluid
Mineral oil – minimum operating temperature limited to 10°F (-12°C)
DC silicone (standard) Electrical termination¹ PVC (standard) PVC/EMI TEFLON