This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
DESCRIPTION The Type T Hydraulic Pressure Pump may be ordered with either oil or a water/alcohol mixture as the pressure medium. There are three available seal packages for the system: Buna-N, Viton, and EPT. Customer must verify compatibility of seals and pump materials with pressure medium. The Type T pump features a dual pressure output manifold, fine adjustment vernier valve, relief valve and dual volume control for rapid pressure increase at lower pressures and easier pumping at higher pressures.
1) Customer must verify compatibility of seals and pump materials with pressure medium.
SPECIFICATIONS Pressure range Type
Test media
Reservoir capacity Operation “O”-rings
Wetted part Connections to test objects Size Weight
0 to 1,000 bar / 14,500 psi Hydraulic
Hydraulic oil, water 1.23 l / 75 in3 Jack pump
Buna-N (standard) or EPT / Viton (optional) Stainless steel, Monel 1/4” and 1/2” BSP
terminations; 1/4” and 1/2” PT female terminations 79.4 x 22.9 x 50.8 cm / 31.3 x 9 x 20 in 9.1 kg / 20 lbs