This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Used for turbulent surfaces or transparent liquids these sight level indicators (glass level gages) can improve accuracy in determining liquid levels. In addition to simulating the function of a stilling well and providing a column four times larger than a standard indicators, large chamber indicators can provide end connections up to 2” NPTF allowing the use of other instrumentation. Units are used in direct reading liquid level measurement for high pressure tanks applications in the petroleum, chemical, natural gas and general process industries. These gages are not recommended for steam/water applications.
There are 2 large chamber indicator models: the Model RLC- Reflex Large Chamber and Model TLC-Transparent Large Chamber. Reflex gages (RLC) have a single vision slot in which light can enter the chamber. Above the liquid level, light is reflected and usually appears silvery. Area where liquid level is filled becomes transparent or dark/opaque depending on the medium being observed. Transparent gages (TLC) have a vision slot on both sides of the chamber. Light enters on the opposite side of the observer so both the level of a liquid and characteristics can be seen. For observation in dark environments, illuminators are available for use with transparent gages.
FEATURES • Non-intrusive
• Not dependent on liquid characteristics • Suitable for turbulent and viscose liquids
• Provide accurate direct liquid level measurement in remote locations • Suitable for vacuum applications • Unlimited lengths
• Can install with other instrumentation • Suitable for sour gas service (NACE) • FM Approved
SPECIFICATIONS Standard Connection Type
Optional Connection Types End Connection
I Side Connection Back Connection* Size Visible lengths Pressure Ranges Temperature Ranges
Standard Materials Cover
Chamber Gaskets Glass
Options Threaded End Connection: ½” NPTF Threaded: ¾" NPTF Socketweld: ½” and ¾” Female Flanged
Threaded: ½” NPTF and ¾" NPTF Socketweld: ½” and ¾” Female Flanged
Threaded: ½” NPTF and ¾" NPTF Socketweld: ½" and ¾" Female Flanged