This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Pressure and Temperature Measurement • Gauge Accessories U.S. Gauge
Sta-Kool™ Cooling Element DESCRIPTION
D
AMETEK USG recommends using a Sta-Kool™, capillary or diaphragm seal to protect pressure gauges, pressure transmitters or pressure switches (not supplied by USG) from process temperatures exceeding 190ºF. Anything exceeding 190ºF will start to degrade weld joints and electronics. The Sta-Kool™ can be either threaded or welded (to eliminate a potential leak path) to any pressure gauge with ½" NPT male connection made out of compatible material. Furthermore, the Sta-Kool™ cooling element can be attached in between a pressure gauge and diaphragm seal for the most comprehensive process measurement protection possible, protecting the instrument from pulsation and temperature extremes.
SPECIFICATIONS Connection
Body Material Weight
½-14 NPT male X ½-14 NPT female 316L stainless steel 15 oz. (0.4 kg)
Operating Parameters 5000 psi maximum at 100°F (38°C) 750ºF (400°C) maximum at 3500 psi
Item 250471 Description Sta-Kool 316L SST cooling element
TEMPERATURE REDUCTION PROFILE Results based on actual laboratory environmental conditions and is to be used as reference only. Actual usage results in the field may vary based on additional process parameters subjected to the device.