This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
The solid state Hawkeye sensor is ideal for point sensing in corrosive and hazardous process environments. The standard Red/Green LEDs also speed your setup and installation by confirming power up and switch status. The Hawkeye is FM and CSA approved for nonincendive applications and intrinsically safe circuits in hazardous areas.
FEATURES
• Sensing head triggers on any metal. • Stainless steel body is rugged and corrosion proof. • Stainless steel washers and fasteners secure. • Circuit is conformally coated and potted. • High intensity LED brightly displays switch status. • 1/2” conduit entry or mini-connector available.
SPECIFICATIONS Materials of Construction Housing and Fasteners Sensing Head Cover LED Lens
Conduit Connection Wiring
Sensing Distance
Temperature Range Warranty Ratings
Non-incendive (Class I and II, Div. 2)
Intrinsically Safe Ex ia, Zone 0 or Class I and II, Div. 1)
Enclosure Protection Approvals
316 stainless steel Lexan®
Polycarbonate 1/2" NPT
36" (0.9 meter) length, 18 gauge multi-strand
4-6 mm (sensing distance will vary depending on target material)
-40° C to 80° C (-40° F to 176° F) Five years
Functions 30 and 31* Function 40*
All models: NEMA 4, 4X and 6, Ingress Protection 67
See StoneL.com/approvals * Only models listed on StoneL’s official website are approved per specific rating. polycarbonate
Table 1 XX
Table 1 HK
Table 2 30 31 40 50
Table 3 7
Table 4 7 8
Table 5 SR SG
Table 2 XX
Series
Hawkeye HK Position Sensor Function*
SST sensor normally open SST sensor normally closed NAMUR (EN 60947-5-6; I.S.)