This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Stainless steel trap includes Y-strainer for reliable performance in tracing, instrumentation, and steam mains.
1. Hardened stainlees steel working surfaces for long service life. 2. Air-jacketing reduces no-load cycling and extends service life. 3. Lapped disc provides seam-tight seal for long service life. 4. Built-in screen for extended trouble-free service. 5. Installing an optional belowdown valve enables quick and easy removal of scale.
SPECIFICATIONS Model
Connection Size (in)
Maximum Operating Pressure (psig) PMO Maximum Operating Pressure (psig)
Maximum Operating Temperaure (°F) TMO Maximum Allowable Pressure (psig) PMA Maximum Allowable Temperaure (°F) TMA Maximum Back Pressure
P46S
Screwed ¼, ⅜, ½ 650* 5
800 650 800
80% of Inlet Pressure
* For best performance over extended periods, it is recommended that the trap be operated at or below 300 psig.
Discharge Capacity E
1. Differential pressure is the difference between the inlet and outlet pressure of the trap.
2. Recommended safety factor: at least 2.
DO NOT DISASSEMBLE OR REMOVE THIS PRODUCT WHILE IT IS UNDER PRESSURE. Allow internal pressure of this product to equal atmospheric pressure and its surface to cool to room temperature before disassembling or removing. Failure to do so could cause burns or other injury. READ INSTRUCTION MANUAL CAREFULLY.