This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
The Model 675 Shark Cage is specifi cally designed for slurry and highly viscous applications where clogging of the sensor area is common. The Model 675 uses a 3.5” Diaphragm protected by a 4.75” cage to prevent unwanted clogging of the sensing area. This submersible level device is made of 316L SS which offers outstanding environmental protection and is available in depths up to 110 feet.
FEATURES
• Oversized 3.5” flush diaphragm to prevent clogging sensing area • 0.25% Full Scale Accuracy • Intrinsically Safe for Class 1 Division 1 • Custom Pressure Ranges & Cable Lengths • Extremely rugged 316L SS construction • Two-wire, 4-20 mA standard output • Reverse polarity and surge protection
Model 675 Submersible Level Transmitter Sensing Port
Shark Cage 3.5” Diameter Diaphragm
Input/Output (Approved Power Supply Required) 12 to 28 VDC/4 to 20 mA (Standard) Pressure Range*
0 to 6 psig /0 to 0.4 bar (0 to 14 ft./0 to 4.2 m water) 0 to 15 psig /0 to 1 bar (0 to 34.6 ft./0 to 10.5 m water) 0 to 30 psig /0 to 2 bar(0 to 69 ft./0 to 21.1 m water) 0 to 60 psig /0 to 4 bar(0 to 138 ft./0 to 42.2 m water) Custom ranges available upon request
Table 2 X
Table 3 X
HOW TO ORDER Table 4
XXXX
Table 5 X
Table 5 M
Table 6 L
Table 7 S
Table 8 XXX
Table 6 X
Table 7 X
Electrical Connection**
Polyurethane Vented Cable with Cable Support (K515072) Diaphragm Material 316L Stainless Steel Fill Fluid
Silicone Oil Cable Length (Specify length in feet)
* Decimal Points for Non-Unit Ranges May Be Used Decimal Point Requires One Model Code Position, Ie 1.08 = 4 Positions