This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Valves, Actuators and Accessories • Electric Actuators
Valvcon Electric Actuator
V Series 115VAC and 230VAC FEATURES
• Electronics are simple to use with a clearly labeled terminal strip and easy access to user wiring.
• Plug-in electronics for simple upgrades and modifications, with coded connectors to make internal miswiring impossible.
• Standard extended 75% duty cycle at ambient temperatures up to 104°F • Visual position indicator is part of the cover (no removal necessary) and clearly shows valve position.
• Dual conduit openings make wiring easier and keep power and control wiring separate.
• “Captive” cover bolts are permanently attached to the cover and simplify installation in awkward locations (small enclosure only). • Stall protection stops the motor if excessive torque or stop is encountered, providing protection from stall conditions (modulating applications only).
• Thermal overload cutout protects the motor from damage caused by over duty cycle applications.
• Split phase, capacitor run motors provide long life and high duty cycles with very low power consumption.
Torque Output (breakaway)
150 in lb 300 in lb 600 in lb 1000 in lb 1500 in lb
2000 in lb 2500 in lb 3000 in lb
Speed (seconds per 90º rotation) 8
15 30 25 40
55 70 75
Duty Cycle
75% 75% 75% 75% 75%
75% 75% 55%
VA Rating
115VAC 230VAC 70VA 70VA 70VA 92VA 92VA
115VA 115VA 115VA 161VA 161VA
92VA 92VA 92VA
161VA 161VA 161VA
Max Running Current at Full Load (True RMS)
115VAC .6 amps .6 amps .6 amps .8 amps .8 amps
.8 amps .8 amps .8 amps
230VAC .5 amps .5 amps .5 amps .7 amps .7 amps
.7 amps .7 amps .7 amps
Max Effective Peak Inrush Current
(= .66 x peak inrush) 115VAC
1.25 amps 1.25 amps 1.25 amps 1.66 amps 1.66 amps
1.66 amps 1.66 amps 1.66 amps
230VAC
.924 amps .924 amps .924 amps 1.29 amps 1.29 amps
1.29 amps 1.29 amps 1.29 amps
Notes: 1. The Maximum Current stated above includes all options. If the brake and/or heater & thermostat are not installed, the actual current draws will be less.