This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Bulk Instrumentation and Accessories Instrument Valves & Manifolds •
Needle Valves NP6 Series - Screwed Bonnet, 6,000 PSI Maximum
DESCRIPTION Parker NP6 Needle Valves are designed with packing below the stem threads and a two-piece stem. The packing below the threads protects the flow stream from thread lubricant contamination or washout and also protects the stem threads from potential damaging effects of the media. The two-piece stem produces a non-rotating lower stem for superior, repeatable sealing and reduced packing wear.
FEATURES
• Packing below power threads protects thread lubricants from media and isolates the media from the lubricant for severe service applications
• O-ring dust seal in bonnet protects stem threads from external contamination
• Choice of two non-rotating stem types: R-Stem – All metal, blunt stem tip K-Stem – PCTFE stem tip
• Non rotating lower stem extends packing and valve life • 316 stainless steel construction • Inline and angle patterns
• Wide variety of US Customary and SI ports • Panel mountable • 100% factory tested
• Optional color coded handles Angle Pattern
SPECIFICATIONS Pressure Rating:
Temperature Rating: PTFE Packing: PCTFE:
Nitrile Rubber:
Ethylene Propylene Rubber:
Fluorocarbon Rubber: Grafoil®:
6000 psig (414 bar) CWP
-65°F to 450°F (-54°C to 232°C) -65°F to 350°F (-54°C to 177°C) -30°F to 250°F (-34°C to 121°C) -70°F to 275°F (-57°C to 135°C)
-15°F to 400°F (-26°C to 204°C) -70°F to 700°F (-57°C to 371°C)